Main 1.4.4
Voice 1.5
Panel 1.3
Sam 1.1
I've run more tests here, and I'm simply not having these issues with my Tempest.
Cheers!
I have re-updated the Os and voice.
Playlist events problem disappeared.
Slope problem still there as Slope has still no effect.
BUT new major problem appeared: when loading any beat, the record button is flashing quickly but the red Led doesn't stay active and impossible to record. This is crazy !! Hope you can solve this as I can't record anything !!
The system information is now displaying the following:
Main 1.4.4
Voice 1.5
Panel 1.3
OS 1.1
Okay, first of all, it's "slop" not "slope", and it is a very subtle effect that you would not likely hear when listening to a single oscillator on its own. You would not be the first person to claim that it's broken, when in fact it is working as it should.
As for the record light not staying lit and not being able to record, this sounds to me like you're trying to record in either '16 Beats' mode or '16 Mutes' mode. You cannot record in either of those modes, and as a consequence the record button will not stay lit.
The rapid blinking of the record LED when loading a beat, however, is
not intended behavior; nor is it a bug in the current Beta OS; that is to say, I have not experienced this issue despite extensive testing and general use. It may, however, indicate that your update was somehow corrupted. It is not recommended that you re-flash the same operating system, so perhaps downgrade to a previous incarnation, then try updating again (I would also recommend that you download the OS files anew to be sure that you don't have a corrupt copy). If the problem persists after reinstalling both operating systems, that may point to a hardware fault; in which case I would recommend contacting DSI support.
Cheers!
INSTALLATION NOTE: It is recommended to calibrate the oscillators/filters and reset the system parameters after installing a Main and/or Voice OS update. These functions can be found in the system menu.