Thanks Razmo, Yep have calibrated several times successfully.
There’s just a little bit of bleed like a second signal not being affected by the filter. Only audible when the filter is completely closed & filter env, velocity & key track all set to 0. Not sure how relevant it is in a real world scenario but it is definitely there!
Would you mind testing yours? Turning the volume up when the filter is completely closed, do you hear anything? Cheers!
I'll test it... But just to be certain; did you check if you may have accidentally set audio mod to a very low value? That could be the cause...
Also notice that the REV2 seems to behave a bit erratic when you use audio mod with a self oscillating filter... Switching oscillators off or even raising sub osc can alter pitch stability in strange ways.. And even introduce very faint bleed... But you have to turn the volume up to hear it, and only when the filter is completely closed (no sound that is)
I would expect this from an analog synth... As long as it only happen when notes are sustained (gated) since you would not hear it in normal operation... If it keeps "ringing" after you released the keys it would be troublesome... Afterall, you WOULD expect a sound when the keys are pressed, and that would totally mask the bleed.
Also make sure you do not have a distortion FX running that would amplify below hearable bleed...
I do not recall having heard any bleed on mine enogh to make me question it 🙂