Updated this evening and experienced the same strange transposing on patches - like everything got kicked down half an octave
Read through the thread and have had hangups in the calibration process previously, but not every time, so I figured I'd give this a try.
My Rev2 had been on for a couple hours when I updated. Calibration froze early on in OSC1. Powered off, powered back on. Calibration then ran without a hitch.
However, it didn't change the transposing behavior. Resetting the Global Parameters after that though seemed to do the trick.
16 voice Rev2 over here.
Seems this freezing is quite widespread... you can follow this thread as I'll post what support tells me about it, unless they decide to participate in this thread directly... I feel there is a need for users to know about this... if it can be fixed, or if we simply have to live with the "power cycle trick" every time we calibrate...
I see users which run into problems like this from time to time... their machines hanging, or behaving strange after an OS update because of all these diffuse things you have to do after an update... resetting globals, calibrating osc/filter, calibrating wheels... and some accordingly do not have to if they are on a higher OS prior to the update, other do, and again, then people who did not have to do these calibrations, have to do them anyway (like I had to) and have to find out by trial and error.
For me it's a chaotic procedure every time a new OS arrives... having to do calibration, global reset, wheels reset and even enter service mode to erase calibration data as well sometimes, before i get a working machine again... the order of the procedures are not really that clear, and on top of that I have to take power cycling into account to make the calibration...
I don't understand why we have to do a reset of the globals manually.. if DSI know that a reset is neede, why don't they just do this reset when the OS has been updated!? ... if a calibration is also needed, why not let it do this automatically too, when the globals had been reset!? ... that puzzles me a bit sometimes.