Vermona 14 Specifications:
VCO 1
Octaves: 16', 8', 4', FIX
Tune Coarse: ± one octave
Tune Fine: ± 1/2 note
Waveforms: sine, saw, rectangle
Pulse-width: can be set manually between 50 % and 95 %
EG 1 intensity: about ± 2 1/2 octaves
sub-oscillator: sine, one octave below main oscillator
VCO 2
Octaves: 16', 8', 4', FIX
Tune Coarse: ± one octave
Tune Fine: ± 1/2 note
Waveforms: sine, saw, rectangle
Pulse-width: can be set manually between 50 % and 95 %
EG 1 intensity: about ± 2 1/2 octaves
sub-oscillator: square, one octave below main oscillator
frequency modulation through LFO and sine-wave of VCO 1
hard-sync through VCO 2
VCO 1 and VCO 2
Master Tune: about ± 1/2 note
glide with legato function
pulse-width-modulation through LFO (up to 100% pulse-width)
Mixer
Volumes of both oscillators and sub-oscillators can be controlled individually
noise generator (white noise)
Volume control for external input
Filter
Type: lowpass with resonance
Slope: 12, 18, oder 24 dB/octave
Tracking: OFF, Half (50%), Full (100%)
Modulation sources: LFO, EG 1, Sinus-Wellenform of VCO 1 (can additionally be controlled by EG 1)
VCA
Modes: ON, EG 2, EG 2 + LFO
Individual volume controls for main outputs and headphone outputs
Envelope Generators EG 1 und EG 2
Type: ADSR
Attack: 1 millisecond to 10 seconds
Decay: 1 millisecond to 10 seconds
Release: 1 millisecond to 10 seconds
Legato mode can be switched on/off per envelope generator
LFO
Waveforms: saw up
saw down
square
triangle
sine
sample & hold
Frequency range: 0.05 Hz (= 20 seconds) to 100 Hz
Can be synchronized to internal or external clock
Reset function
Vibrato Generator
Waveforms: Sinus or Dreieck
Frequency range: 0.05 Hz (= 20 seconds) bis 100 Hz
Modulation destinations: VCO 1
VCO 2
VCO 1 and VCO 2
Modulation intensity can be controlled by aftertouch and/or modulation wheel
VCF MOD
Modulation destinations: Cutoff-frequency
filter-FM-intensity through sine waveform of VCO 1
Modulation intensity can be controlled by aftertouch and/or modulation wheel
Keyboard
44 keys, half-weight (Fatar)
Aftertouch
Velocity for controlling Cutoff-frequency and/or VCA modulation through EG 2
Pitchbender
can be adjusted freely between ± 1/2 note up to ± 1 octave
Modulation destinations VCO 1
VCO 2
VCO 1 and VCO 2
Arpeggiator
Modes: ARP (classic arpeggiator mode)
SEQ (complete arpeggios can be stored)
Up to 60 notes with velocity
Arpeggios can include rests between notes
Same notes can be used more often (with help of sustain-pedal)
variable gate length: 20 %
50 %
80 %
100 % (legato)
random values between 20 % and 80 %
random values between 20 % and 100 % (legato)
Pattern: Up (1, 2 and 3 octaves)
Down (1, 2 and 3 octaves)
Up & Down (1, 2 and 3 octaves)
Alternate Up
Alternate Down
Zufall (1, 2 and 3 octaves)
Order forward
Order backward
can be triggered by LFO, internal or external clock
Connections
audio outputs: headphones (1/8- und 1/4- jack)
unbalanced 1/4- jack (line)
transformer-balanced XLR output (line)
audio input, 1/8- jack
CV/Gate outputs (1/4- and 1/8- TRS jacks) Gate Out
modulation wheel
1V/octave
pitchbender
Sustain pedal inputs, 1/4- jack
Volume pedal, 1/4- jack with trim-pot for minimum volume
MIDI connections: IN
OUT
THRU
MIDI
Send: Keyboard, polyphon
Arpeggiator
MIDI-Control-Changes for controlling Mono Lancet and Mono Lancet 15 parameters
Receive: MIDI notes
Dimensions and Weight
Dimensions: about 77 cm x 31 cm x 15 cm (width x depth x height)
Weight: 6.5 kg