LFO on Pitch: strange issue

LFO on Pitch: strange issue
« on: January 05, 2018, 12:00:56 PM »
I just mentioned another issue on my Rev2: When LFO 1 modulates the pitch with a triangle wave, some notes seam to be modulated with a "defective" triangel wave: The Notes B0, C1, B2, C3 are modulated different than all others, it sounds almost like a square wave!?!

Re: LFO on Pitch: strange issue
« Reply #1 on: January 05, 2018, 12:10:38 PM »
Are you running the latest BETA, 1.1.0.3? If not, please do so and see if this changes the behavior. If not, then contact our dedicated tech support for troubleshooting.
SEQUENTIAL

Re: LFO on Pitch: strange issue
« Reply #2 on: January 05, 2018, 12:13:55 PM »
I cannot reproduce this with 1.1.0.3. Do you have a sound example and some settings how to reproduce it?
DSI Prophet Rev2

Re: LFO on Pitch: strange issue
« Reply #3 on: January 05, 2018, 12:21:58 PM »
Yes, latest Firmware.

Easy settings: Basic patch, LFO 1 dest. Osc 1 freq, that's all.

Re: LFO on Pitch: strange issue
« Reply #4 on: January 05, 2018, 12:27:26 PM »
Easy settings: Basic patch, LFO 1 dest. Osc 1 freq, that's all.

That should not be all. It does not have any effect. What about LFO 1 amount and frequency? Try amount = 90 and freq = 30. I can clearly hear a continuously rising and falling tone.
DSI Prophet Rev2

Re: LFO on Pitch: strange issue
« Reply #5 on: January 05, 2018, 12:45:37 PM »
It's a lot worse with these settings: The higher the amount level is, the more notes/keys have this issue.

Re: LFO on Pitch: strange issue
« Reply #6 on: January 05, 2018, 12:54:10 PM »
I contacted the support...

Re: LFO on Pitch: strange issue
« Reply #7 on: January 05, 2018, 01:03:15 PM »
After doing a global reset, issue is the same and additional some keys sometimes don't make any sound at all. Can't believe it...

Re: LFO on Pitch: strange issue
« Reply #8 on: January 05, 2018, 01:06:33 PM »
Really strange. Maybe you should calibrate the oscillators...
DSI Prophet Rev2

Re: LFO on Pitch: strange issue
« Reply #9 on: January 05, 2018, 01:34:59 PM »
Thanks, that cleared the issue!