Feature requests

[camillomuc]

1) I would love to see the teo5 and take 5 get some sort of shortcut to pan spread, like maybe you hold down noise and turn vintage to add pan spread vs using the mod matrix.

2) knob value parameter display. You have a super clear and nice Oled that is not being utilized to its fullest imo.

3) custom init patch. Like you could save a custom init patch that could be recalled by the front panel shortcut or a new shortcut.

4) the ability to only assign the arp to either the lower or upper split, example the bass line could be an arp while the upper you could play

A short cut for pan spread would be supercool. The only question is: What mod slot can be used for that? Perhaps the next free slot?

[kpatz]

A short cut for pan spread would be supercool. The only question is: What mod slot can be used for that? Perhaps the next free slot?

It could scan the matrix for a slot that already has Voice Sprd->Panning and update that, or take the first unused slot and assign and set value on the fly.

[FrankChannel]

To echo what's been said: knob value display please!

[nunucello]

Biggest Feature Request for me is:

1. An asterick or period appears on display when the original value of the knob is reached - like on the Prophet 10 rev 4.


Thank You.

[BT]

Hi. TEO already features an "edit dot" that appears on the 7-segment display when a saved value is reached while turning a pot.

[nunucello]

Hi. TEO already features an "edit dot" that appears on the 7-segment display when a saved value is reached while turning a pot.

My TEO 5 does not do this.  I have firmware version 1.1.0.4.
The OB-X8 does this - but not the TEO-5 with firmware 1.1.0.4

I want to be wrong on this - so maybe I am missing something and can use some help.  Thank You.

[Quatschmacher]

Hi. TEO already features an "edit dot" that appears on the 7-segment display when a saved value is reached while turning a pot.

My TEO 5 does not do this.  I have firmware version 1.1.0.4.
The OB-X8 does this - but not the TEO-5 with firmware 1.1.0.4

I want to be wrong on this - so maybe I am missing something and can use some help.  Thank You.

What pot mode are you using? If it’s set to “relative” there may be occasions where you don’t ever hit the saved value (if you don’t rotate the pot to both extremes), causing you to think it isn’t working. Other than that, perhaps it’s a sensitivity thing; sometimes you need to rotate the pots slowly.