The Official Sequential/DSI Forum

One voice tuning issue

Micky

One voice tuning issue
« on: November 07, 2021, 11:36:27 PM »
Hy,
i wrote this to the sequential support.

No big deal this issue, but good to know about it, i think...

" Hello,

there´s a (funny, if popular…) tuning issue in this synths.
Here in Germany it´s confirmed on different units.
I don´t know, if it´s on the Prophet 5 also.

What you get with this bug is one more or less detuned voice. It´s better to hear in RoundRobin mode.

Description how to reach, synth should be in tune, not necessary to tell…

RoundRobin mode
Init Patch ( > Vintage knob 4 ! )
Hold unison and press 7 (so one voice is very detuned later, if you choose at example 3, it´s less…)
Press unison again for not unison mode.
Here all voices, one is detuned.

This is stored in this patch, whatever you do with it, one voice is detuned still on in this patch. If you copy it, work on it with new patches
They all have this one detuned voice.

The solution is to init the patch again or :

Hold unison and press 1
Press unison again for not-unison mode. The voice is in tune again.

A little funny this issue…if you know about it ! I found it after a time, in which i thought, my unit is defect. That was not very funny…

So, no big problem, but people should know about it !

Greetings from Germany

Michael Barck "

Qwave

Re: One voice tuning issue
« Reply #1 on: November 08, 2021, 01:14:57 AM »
I am to reproduce this bug here on my Prophet-10 running firmware 2.01
keep on turning these knobs

Re: One voice tuning issue
« Reply #2 on: November 08, 2021, 02:48:02 AM »
Does this also happen on more than one voice if you set unison to something other than 1 when applying the detuning?

Micky

Re: One voice tuning issue
« Reply #3 on: November 08, 2021, 04:49:01 AM »
Does this also happen on more than one voice if you set unison to something other than 1 when applying the detuning?

No, you can take each unison-mode, 1-10 Voices, Chord, Polyunison. Only one voice is not in tune if turning
unison off. But the impact of the detune for this voice is different from using 2 to 8.

Re: One voice tuning issue
« Reply #4 on: November 08, 2021, 04:59:51 AM »
Hy,
i wrote this to the sequential support.

No big deal this issue, but good to know about it, i think...

" Hello,

there´s a (funny, if popular…) tuning issue in this synths.
Here in Germany it´s confirmed on different units.
I don´t know, if it´s on the Prophet 5 also.

What you get with this bug is one more or less detuned voice. It´s better to hear in RoundRobin mode.

Description how to reach, synth should be in tune, not necessary to tell…

RoundRobin mode
Init Patch ( > Vintage knob 4 ! )
Hold unison and press 7 (so one voice is very detuned later, if you choose at example 3, it´s less…)
Press unison again for not unison mode.
Here all voices, one is detuned.

This is stored in this patch, whatever you do with it, one voice is detuned still on in this patch. If you copy it, work on it with new patches
They all have this one detuned voice.

The solution is to init the patch again or :

Hold unison and press 1
Press unison again for not-unison mode. The voice is in tune again.

A little funny this issue…if you know about it ! I found it after a time, in which i thought, my unit is defect. That was not very funny…

So, no big problem, but people should know about it !

Greetings from Germany

Michael Barck "

Have you had a reply from them confirming it and putting it on the list of future fixes?

Micky

Re: One voice tuning issue
« Reply #5 on: November 11, 2021, 12:12:49 AM »
Hy,
i wrote this to the sequential support.

No big deal this issue, but good to know about it, i think...

" Hello,

there´s a (funny, if popular…) tuning issue in this synths.
Here in Germany it´s confirmed on different units.
I don´t know, if it´s on the Prophet 5 also.

What you get with this bug is one more or less detuned voice. It´s better to hear in RoundRobin mode.

Description how to reach, synth should be in tune, not necessary to tell…

RoundRobin mode
Init Patch ( > Vintage knob 4 ! )
Hold unison and press 7 (so one voice is very detuned later, if you choose at example 3, it´s less…)
Press unison again for not unison mode.
Here all voices, one is detuned.

This is stored in this patch, whatever you do with it, one voice is detuned still on in this patch. If you copy it, work on it with new patches
They all have this one detuned voice.

The solution is to init the patch again or :

Hold unison and press 1
Press unison again for not-unison mode. The voice is in tune again.

A little funny this issue…if you know about it ! I found it after a time, in which i thought, my unit is defect. That was not very funny…

So, no big problem, but people should know about it !

Greetings from Germany

Michael Barck "

Have you had a reply from them confirming it and putting it on the list of future fixes?

Yes, i think they´ll fix it ...

" Hi Michael-
Thanks for contacting Sequential. I can reproduce this bug, and have added it to our internal list. Thanks for bringing it to our attention. "

Re: One voice tuning issue
« Reply #6 on: November 11, 2021, 02:46:48 AM »
Hy,
i wrote this to the sequential support.

No big deal this issue, but good to know about it, i think...

" Hello,

there´s a (funny, if popular…) tuning issue in this synths.
Here in Germany it´s confirmed on different units.
I don´t know, if it´s on the Prophet 5 also.

What you get with this bug is one more or less detuned voice. It´s better to hear in RoundRobin mode.

Description how to reach, synth should be in tune, not necessary to tell…

RoundRobin mode
Init Patch ( > Vintage knob 4 ! )
Hold unison and press 7 (so one voice is very detuned later, if you choose at example 3, it´s less…)
Press unison again for not unison mode.
Here all voices, one is detuned.

This is stored in this patch, whatever you do with it, one voice is detuned still on in this patch. If you copy it, work on it with new patches
They all have this one detuned voice.

The solution is to init the patch again or :

Hold unison and press 1
Press unison again for not-unison mode. The voice is in tune again.

A little funny this issue…if you know about it ! I found it after a time, in which i thought, my unit is defect. That was not very funny…

So, no big problem, but people should know about it !

Greetings from Germany

Michael Barck "

Have you had a reply from them confirming it and putting it on the list of future fixes?

Yes, i think they´ll fix it ...

" Hi Michael-
Thanks for contacting Sequential. I can reproduce this bug, and have added it to our internal list. Thanks for bringing it to our attention. "

Brilliant, thanks for reporting it.