Hello,
I have a brand new REV 2 and I'm experiencing big issues with default patch.
First problem, it refuses to save the default patch I select.
I'm on the patch I want as default, I press Global, then Global again, but my REV2 doesn't save the correct patch.
Very often if I select U1P01, it will save U2P02. If I set U2P02 as default, it will recall U3P02, or U3P03. Usually something "near" the one I wanted but most of the time on the following bank.
Sometimes (very rarely) the save will work, but only for 1 or 2 starts. Eventually it will always be lost, and the synth will pick a random patch as default.
Second problem, the default patch will be recalled with oscillator 1 set at 1 semitone over the saved tuning. So unplayable without changing the tuning.
It only happens on oscillator 1.
If oscillator 1 is saved as C2, when I power the REV 2 it will be set at C2#.
If set at F1 in the saved patch, then it will be recalled at F1#.
Always 1 semitone over ...
It also happens on factory presets if I set one as default.
As soon as I change the program, the problem is gone. The REV2 works as should be, never one problem.
It's only happening on the default patch, and only occuring on the first patch when I power on the REV 2.
Let's say I set U1P01 as default. The next time I power up the REV2 U1P01 (if I'm lucky) will show up with Osc1 at C2# instead of C2.
If I go to U1P02, then come back to U1P01, then Osc 1 will be set at C2, as should be.
I've tried to reset global many many times, recalibrate, clear calibration, ... , nothing has helped.
I've even changed the main board this week, but the issues are still exactly the same.
Anybody has encountered those issues? Or one of those?
Any idea where can it come from?
Thanks a lot in advance !