Any hope for an official dust cover?

jym

Any hope for an official dust cover?
« on: April 14, 2020, 10:26:50 AM »
I'd really like to get a dust cover, perhaps with the Sequential logo.

Re: Any hope for an official dust cover?
« Reply #1 on: April 14, 2020, 11:29:01 AM »
Check out Lecover.com, I get a lot of covers from them and they are very well made.  Happy to do custom orders as well, the one they did for my OB-6 desktop looks great.

Re: Any hope for an official dust cover?
« Reply #2 on: April 23, 2020, 02:33:59 AM »
If you are in the UK or don’t mind importing, I found this for vinyl covers.


https://annstweed.com/collections/synthesizer-dust-covers

Sonic Neutronic

  • *
  • 30
  • All about the 70s/80s Horror sound
Re: Any hope for an official dust cover?
« Reply #3 on: April 23, 2020, 03:22:18 AM »
This company has been great to deal with and the covers are excellent value IMO.
https://www.digitaldeckcovers.com/sequential-circuits
Prophet 5 Rev 4

Re: Any hope for an official dust cover?
« Reply #4 on: April 24, 2020, 06:51:28 AM »
I reckon decksaver will probably bring one out for the standard edition; the special edition might be trickier though I guess they could make one that fits when the panel is flat.

Re: Any hope for an official dust cover?
« Reply #5 on: April 24, 2020, 07:09:15 AM »
That's what I'm hoping too. I have decksavers for all my gear, just got the new OB6 desktop one yesterday in fact.

jym

Re: Any hope for an official dust cover?
« Reply #6 on: April 25, 2020, 06:01:06 AM »
On a similar note, what do you guys do to clean synths if they do in fact manage to get dusty?  I didn't see anything in the official manual.  Swiffer?  Is compressed air a no no?

Re: Any hope for an official dust cover?
« Reply #7 on: April 25, 2020, 04:48:26 PM »
Just a microfibre cloth usually, sometimes a small clean paint brush to get to hard to reach areas.  Occasionally compressed air, I have nothing against it it just doesn't always do as good of a job getting all the dust off.

S Y Z Y G Y X

  • **
  • 162
  • WWW.SYZYGYXMUSIC.COM
    • S Y Z Y G Y X
Re: Any hope for an official dust cover?
« Reply #8 on: April 25, 2020, 05:11:52 PM »
Good ol feather dustah does the job just fine over here.  Few bucks at the grocery store
SEQUENTIAL Pro 3, DSI Prophet 12, DSI Prophet Rev2-8, Moog Subsequent 37, Roland Alpha Juno 2, Novation Bass Station 2, BOSS VE500, MOTU Micro Lite, AKAI APC240 MKII, SSL Fusion, UAD Apollo X6, MacBook Pro 2017, ADAM A7X Monitors, Logic X
www.syzygyxmusic.com
https://syzygy-x.bandcamp.com

Re: Any hope for an official dust cover?
« Reply #9 on: April 28, 2020, 01:23:32 PM »
Vacuum with a soft brush head attached.

Re: Any hope for an official dust cover?
« Reply #10 on: May 03, 2020, 05:43:07 PM »
Hey fellas, I talked with Digital Deck Covers earlier today and gave them the dimensions for my SE and they were super quick to list it on their site! My cat loves walking on my Pro 3 for some reason, she never used to walk there before lol, I just ordered the cover. Hope that helps anyone looking as well!

https://www.digitaldeckcovers.com/sequential-circuits-pro-3-se?search=pro%203%20se

Kosmikos

  • *
  • 22
  • https://kosmikos.bandcamp.com
    • Kosmikos on bandcamp.com
Re: Any hope for an official dust cover?
« Reply #11 on: July 25, 2020, 10:28:40 AM »
I’m in the UK, and I couldn’t find any good cover.
Fortunately I’m quite handy with a sewing machine, so I’ve made one for my Pro3 myself (and another one for my Rev2 while I was a it). Three layers: cotton, foam, vinyl, and with a flap at the back for the cables. It feels and look very luxurious.
Cost me about £50 of materials, so £25 per cover! The most expensive was the foam fabric. Also it was two days of work where I could have been playing with the synths, but in the end I reckon it’ll be worth it.
I thought I’d post it here for inspiration  ;D

Re: Any hope for an official dust cover?
« Reply #12 on: July 26, 2020, 02:59:06 AM »
If you are in the UK or don’t mind importing, I found this for vinyl covers.


https://annstweed.com/collections/synthesizer-dust-covers

Thanks for the tip. Just ordered.

Kosmikos

  • *
  • 22
  • https://kosmikos.bandcamp.com
    • Kosmikos on bandcamp.com
Re: Any hope for an official dust cover?
« Reply #13 on: July 26, 2020, 12:03:36 PM »
If you are in the UK or don’t mind importing, I found this for vinyl covers.


https://annstweed.com/collections/synthesizer-dust-covers

Thanks for the tip. Just ordered.
Haha, I think I missed this post...  ::)
Oh well, I’m really enjoying my home made cover. Also I am not sure this would have fitted my SE.
« Last Edit: July 26, 2020, 12:05:23 PM by Kosmikos »

Re: Any hope for an official dust cover?
« Reply #14 on: August 05, 2020, 04:19:43 PM »
Hey fellas, I talked with Digital Deck Covers earlier today and gave them the dimensions for my SE and they were super quick to list it on their site! My cat loves walking on my Pro 3 for some reason, she never used to walk there before lol, I just ordered the cover. Hope that helps anyone looking as well!

https://www.digitaldeckcovers.com/sequential-circuits-pro-3-se?search=pro%203%20se

I'm about to order the same cover.  How well does it work with the SE panel angled?

jym

Re: Any hope for an official dust cover?
« Reply #15 on: September 29, 2020, 11:32:08 AM »
I like the cover I received from Digital Deck Covers.  I contacted Decksaver and they said the pro 3 is on their development list.

Re: Any hope for an official dust cover?
« Reply #16 on: November 03, 2020, 03:15:37 AM »
I reckon decksaver will probably bring one out for the standard edition; the special edition might be trickier though I guess they could make one that fits when the panel is flat.

Just got the word from Decksaver that they are in the final stages of developing a cover for the standard edition, not the special edition. I am happy to place my order as soon as their decksaver product lands in the store.

Re: Any hope for an official dust cover?
« Reply #17 on: November 03, 2020, 07:03:14 AM »
I reckon decksaver will probably bring one out for the standard edition; the special edition might be trickier though I guess they could make one that fits when the panel is flat.

Just got the word from Decksaver that they are in the final stages of developing a cover for the standard edition, not the special edition. I am happy to place my order as soon as their decksaver product lands in the store.

That’s cool. I guess doing one for the SE would be tricky. I guess they could make it for the flat position but perhaps people wouldn’t buy it as they might not want to lower the panel every time they put the cover back on.

Still hoping they do a Summit cover. If people want one, they need to contact them as their production decisions are based on the volume of interest received.

I asked about a P5/10 cover too and they said they hope to do one.

Re: Any hope for an official dust cover?
« Reply #18 on: November 17, 2020, 06:23:33 AM »
Heyyy actually that link I posted is for the SE edition, sorry I forgot to mention that. I gave them the dimensions for mine a while back and the cover works great, it only works when the top panel is down however. Hope that helps anyone still looking!

Re: Any hope for an official dust cover?
« Reply #19 on: November 20, 2020, 07:28:22 AM »
If you are in the UK or don’t mind importing, I found this for vinyl covers.


https://annstweed.com/collections/synthesizer-dust-covers

I bagged one of these and it does the job nicely.