The Official Sequential/DSI Forum

Custom patches sharing.

Custom patches sharing.
« on: March 09, 2016, 01:09:30 PM »
I asked to create this thread in hopes of helping fellow Prophet 6 users in designing custom patches. I was inspired by my previous thread where I asked for help in nailing down a specific synth tone that was used for the Death Wish 2 soundtrack. For example if someone wanted to create a "Jump" patch we would help them in giving them a run down of what to do. Sort of a reference guide to famous and original patches that everyone here can exchange.
Prophet 6, Prophet X, Moog Sub 37, Tempest Drum Computer, Roland V Piano, Fender American Stratocaster, Roger Linn Adrenalinn iii, Origin Effects Cali76 and SlideRig compressor, ASUS Zenbook Pro Computer, Soundcraft MTK 22 Mixer, Mark Of The Unicorn Digital Performer 10 Software.

Re: Custom patches sharing.
« Reply #1 on: March 13, 2016, 04:12:02 PM »
Darn, I was really hoping this would have taken off..kind of depressing.  :-\
Prophet 6, Prophet X, Moog Sub 37, Tempest Drum Computer, Roland V Piano, Fender American Stratocaster, Roger Linn Adrenalinn iii, Origin Effects Cali76 and SlideRig compressor, ASUS Zenbook Pro Computer, Soundcraft MTK 22 Mixer, Mark Of The Unicorn Digital Performer 10 Software.

Re: Custom patches sharing.
« Reply #2 on: March 13, 2016, 06:15:31 PM »
Describe with some detail one of your own favorite patches, or a trick you've discovered in using the Prophet-6, and people may respond.  Some times it takes an effort to get a discussion going.
« Last Edit: March 13, 2016, 06:17:08 PM by Sacred Synthesis »
The Musical Synthesizer YouTube Channel:
https://www.youtube.com/channel/UChLGwGiRVs7rlZXnOG9_mUw

The Musical Synthesizer Blog: https://themusicalsynthesizer.wordpress.co

Re: Custom patches sharing.
« Reply #3 on: August 05, 2017, 02:26:15 PM »
I'm working on a bank of patches to share for the Prophet 6. Was looking for a thread with other members .syx attachments, but haven't found the one yet so am posting here. I'll reference this thread when I upload if I do find a better thread.

The basis of the bank is recreating the 15 Factory Patches from the Moog Source - as seen in the patch sheets in back of the Source manual. Yes, I know that's not a Sequential/DSI product, but it's fun, and the P6 and Source share a couple of features, like half or full keyboard filter mod.

More info to come, but patches 001-0015 will be as close to 1:1 recreations as I can get from the patch sheets and by listing to online samples/videos of the Source (not lucky enough to have access to one). Patches 021-035 will be alternate version of those recreations using seq/arp and sublet additions of features the P6 has that the Source didn't - there are plenty of those, but I'll try to keep it tame then others can mangle to their heart's delight.

--adding youtube link of a great Source video of the factory patches and a link to the manual. The last chapter are the 15 patch sheets. #16 is not really a preset. Seems like it was more of an extra location to swap and paste while reorganizing patches.

https://youtu.be/xXg9H3vHj_s?t=8 (synthmania)

http://thesnowfields.com/manuals/Source_Manual.pdf


=J
« Last Edit: August 05, 2017, 02:35:44 PM by abstrx »

Re: Custom patches sharing.
« Reply #4 on: August 06, 2017, 04:03:23 PM »
Here are variations 1 and 2. Programmed from Moog Source factory patch sheets in the back of the Source manual. I haven't A/B'd these against actual Source sounds yet. That's next but thought I would share these as they are before further tweaking. These sets match the Moog settings and are edited to be usable even if they don't sound exactly like the Source.

See READ ME notes for which user patches these 10's files will write over, and for other notes on performance controls, etc.

=J


Re: Custom patches sharing.
« Reply #5 on: August 06, 2017, 04:06:50 PM »
Adding .syx files without the .zip in case anyone is opening in a mobile app, such as Sysex Base.


Re: Custom patches sharing.
« Reply #6 on: August 06, 2017, 04:08:21 PM »
NOTES ON WHICH USER PATCHES WILL BE OVERWRITTEN BY LOADING THESE .SYX FILES


“P6 Moog Source 1-9.syx” contains emulations of Moog Source factory patches 1-9.
This .syx Tens dump will write over 000-009.
000 = P6 factory patch 020.


“P6 Moog Source 10-15.syx” contains emulations of Moog Source factory patches 10-15.
This .syx Tens dump will write over 010-019.
016 = P6 factory patch 001.
017 = P6 factory patch 002.
018 = P6 factory patch 004.
019 = P6 factory patch 005.




“P6 Moog Sorcerer 21-29.syx” contains variations of P6 Moog Source 1-9.
This .syx Tens dump will write over 020-029.
020 = P6 factory patch 033.

“P6 Moog Sorcerer 30-35.syx” contains emulations of P6 Moog Source 10-15.
This .syx Tens dump will write over 030-039.
036 = P6 factory patch 035.
037 = P6 factory patch 032.
038 = P6 factory patch 030.
039 = P6 factory patch 027.



***Once all 4 Tens sets are loaded your P6 will have these patches loaded to 000-039***

000 = P6 factory patch 020.

MOOG SOURCE FACTORY PATCHES - (MW and/or velocity to taste)
001 = LEAD 1
002 = LEAD 2
003 = HORN
004 = FLUTE
005 = BASS CLAV
006 = VIBES
007 = STRING BASS
008 = HARPSICORD
009 = ORGAN
010 = TRILL VOICE
011 = TAURUS
012 = SYNTHVOX
013 = SAX
014 = WIND
015 = SNARE

016 = P6 factory patch 001.
017 = P6 factory patch 002.
018 = P6 factory patch 004.
019 = P6 factory patch 005.
020 = P6 factory patch 033.

P6 MOOG SOURCRER PATCHES - (Programmed for unison or poly w/ FX either ON of OFF. Some have Arp or Seq data)
021 = LEAD 01 - (play w/ cutoff for fizz, MW for LFO 16 beat)
022 = LEAD 02 - (light MW opens pallet. Dist = nice. Adjust VCF +/- 10-20% for different tones)
023 = BRASS - (Vel and/or MW to taste)
024 = FLUTEY - (open VCF for brassy sounds)
025 = BASS CLAVland - (MW, HP VCF off if you want bottom end growl)
026 = VIBEz - (MW for vibrato)
027 = STRG BASS - (Arp off, vary velocity)
028 = ‘ARPSICHORD - (add light MW; Try Unison)
029 = WANKLE ROTARY ORGAN - (MW for rotary emphasis)
030 = TRILLION - (MW for beat fx)
031 = DYNOTAUR - (MW = VCF pulsing)
032 = OOHS - (MW = vibrato. Unison OFF for choir harmonies)
033 = SAXONY - (Enable FX for wild res. bells - Unison on/off to taste)
034 = WINDY - (Enable hold, play octaves for depth, MW = high wind advisory)
035 = SPARE SNARE - (MW = noise, Vary velocity for tone, Unison = Embiggened snareiness)

036 = P6 factory patch 035.
037 = P6 factory patch 032.
038 = P6 factory patch 030.
039 = P6 factory patch 027.


“P6 Fakey INIT 057.syx” = Individual patch 057 = my pseudo INIT patch that I start from.


« Last Edit: August 06, 2017, 04:11:01 PM by abstrx »

Re: Custom patches sharing.
« Reply #7 on: August 06, 2017, 06:43:54 PM »
Rough n random demo of B bank for anyone who is curious what the versions with added P6 features and Fx sound like
https://drive.google.com/open?id=0B8PzRBLiyugvUUR6UGxIdk84Tk0

=J

« Last Edit: August 06, 2017, 07:02:15 PM by abstrx »

Re: Custom patches sharing.
« Reply #8 on: January 16, 2019, 05:07:25 PM »
Rough n random demo of B bank for anyone who is curious what the versions with added P6 features and Fx sound like
https://drive.google.com/open?id=0B8PzRBLiyugvUUR6UGxIdk84Tk0

=J

Here's a repair tech playing Source presets 1-15 as a comparison.
https://youtu.be/o6jCdN8GQ5Q?t=192

now that my P6 is out of storage again I'll try to get the Sourcery bank presets sounding closer to the real thing. But if anyone's already tried that please share your results! :D

;j