OB6 MPE

Pym · « **Reply #20 on:** April 10, 2020, 01:13:40 AM »

I actually already have it working on the Rev2/P6/OB6 but I need to finish testing. I can't do that right now as I don't have the hardware with me, but once I get back to the US (hopefully within the next 3 months) I'll get it out

sofine · « **Reply #21 on:** April 14, 2020, 01:39:23 AM »

Quote from: Pym on April 10, 2020, 01:13:40 AM

I actually already have it working on the Rev2/P6/OB6 but I need to finish testing. I can't do that right now as I don't have the hardware with me, but once I get back to the US (hopefully within the next 3 months) I'll get it out

What! Dig a tunnel, get there, quick!

Nice surprise. Thanks for doing this.

sofine · « **Reply #22 on:** April 14, 2020, 08:32:06 AM »

Quote from: Pym on April 10, 2020, 01:13:40 AM

I actually already have it working on the Rev2/P6/OB6 but I need to finish testing. I can't do that right now as I don't have the hardware with me, but once I get back to the US (hopefully within the next 3 months) I'll get it out

Do you think you will also be able to implement MPE for the PX?

Pym · « **Reply #23 on:** April 14, 2020, 12:26:59 PM »

Can't make any promises at this time but it shouldn't be too hard to port over when I have the time to do so

Quote from: sofine on April 14, 2020, 08:32:06 AM

Quote from: Pym on April 10, 2020, 01:13:40 AM
I actually already have it working on the Rev2/P6/OB6 but I need to finish testing. I can't do that right now as I don't have the hardware with me, but once I get back to the US (hopefully within the next 3 months) I'll get it out

Do you think you will also be able to implement MPE for the PX?

Soundquest · « **Reply #24 on:** April 15, 2020, 11:45:38 AM »

Holy cow, that's great news! thanks Pym.

Daycleier · « **Reply #25 on:** June 24, 2020, 04:29:43 AM »

Hey. How are plans evolving on the "getting back to US" front?

Really waiting for mpe...

Quote from: Pym on April 10, 2020, 01:13:40 AM

I actually already have it working on the Rev2/P6/OB6 but I need to finish testing. I can't do that right now as I don't have the hardware with me, but once I get back to the US (hopefully within the next 3 months) I'll get it out

Channelizer · « **Reply #26 on:** June 24, 2020, 04:31:52 AM »

+2 (OB6 and P6)

datalek · « **Reply #27 on:** June 25, 2020, 07:38:26 AM »

As aLinnstrument owner with a brand new OB6, I would very much like to see mpe support.

sevenmunsters · « **Reply #28 on:** June 25, 2020, 11:10:11 AM »

Made the account for a +1. Been lurking for a year

PhJ · « **Reply #29 on:** July 02, 2020, 08:54:11 AM »

Another +1 from another new member

shmuelyosef · « **Reply #30 on:** July 02, 2020, 12:11:57 PM »

TOTALLY +1

Pym · « **Reply #31 on:** July 02, 2020, 08:49:09 PM »

I finally got back from Germany, this is one of the top things on my list now

datalek · « **Reply #32 on:** July 06, 2020, 04:36:16 AM »

Quote from: Pym on July 02, 2020, 08:49:09 PM

I finally got back from Germany, this is one of the top things on my list now

Thats great news, good luck !

chrisharrisx · « **Reply #33 on:** July 08, 2020, 01:30:03 PM »

Really looking forward to this! 2020 needs it 😂

OBJimKenobi · « **Reply #34 on:** July 08, 2020, 03:56:33 PM »

Does anybody know if the ASM Hydrasynth could act as an MPE controller for an MPE enabled OB6? It gained MPE support in a recent update and has a keyboard with polyphonic aftertouch.

It's an awesome synth in itself and compliments the OB6 well.

Soundquest · « **Reply #35 on:** July 09, 2020, 07:30:29 AM »

I don't see why not- at least for the poly AT. But a more dedicated MPE might give easier 3 dimensional transmit info. Not sure if ASM's slider strip will work or not outside of their instrument. I use a Linn Instrument so I can do 3 axis. I found that with the Linn that the immediacy of the pitch slides is its real strength. I rarely use the vertical finger movement for volume. Rather just peddle that.

OBJimKenobi · « **Reply #36 on:** July 09, 2020, 08:45:16 AM »

Quote from: Soundquest on July 09, 2020, 07:30:29 AM

I don't see why not- at least for the poly AT. But a more dedicated MPE might give easier 3 dimensional transmit info.

For sure. Was more thinking it'd be a nice bonus from owning a Hydrasynth raher than a Hydrasynth being the best controller available for an MPE'd OB6.

Quote from: Soundquest on July 09, 2020, 07:30:29 AM

I use a Linn Instrument so I can do 3 axis. I found that with the Linn that the immediacy of the pitch slides is its real strength. I rarely use the vertical finger movement for volume. Rather just peddle that.

Nice. I've yet to try one. I tried a Roli Seaboard but it felt bad, it was however a store demo model so God knows what condition it was actually in or how it was setup.

Daycleier · « **Reply #37 on:** August 27, 2020, 11:25:16 PM »

Quote from: Pym on July 02, 2020, 08:49:09 PM

I finally got back from Germany, this is one of the top things on my list now

How is it going with this?

Anticipation is growing by the minute...

umfufu · « **Reply #38 on:** August 31, 2020, 03:54:22 PM »

Huge +1 from me as well.
So excited that MPE is on the roadmap!

Pym · « **Reply #39 on:** August 31, 2020, 04:16:50 PM »

Well after I got back from Germany, I moved from San Francisco. The day I moved to Ben Lomond, I had one beautiful night of sleep on my new mattress when I was evacuated from the fires

So now I have a Pro3 in front of me. I have to wait til I'm back in a set up studio to get back to the MPE stuff. I promise it'll be worth it