The Official Sequential/DSI Forum

Feature requests

Re: Feature requests
« Reply #40 on: February 09, 2019, 05:47:11 PM »
Could there be anything added that would deal with the phasing of oscillator samples start points.

Presuming you're referring to oscillators and not samples (your question was a little ambiguous on that front), the fact that they start at arbitrary points is intentional and often useful.  It emulates the free-running oscillators on a conventional synthesizer design.

If you want to defeat this, just turn on Wave Reset on the Osc Shape tab as described on page 27 of the manual.

Re: Feature requests
« Reply #41 on: February 09, 2019, 07:25:07 PM »
I made a post about this but got no responses thus far. Anyone's thoughts on this...

Itís a bit of a loaded question/request but one thing I love on the P6 is being able to have the sequencer running and alternating between patches which in turn alternates between different sequences. On the PX, this doesnít happen. Switching patches just stops the sequencer entirely. It would be a great performance aspect to have, especially on drum based patches. Alternating between sequences and patches with no interruption.

I also noticed that in a split based patch, when I select ďEdit Layer BĒ there is a slight and awkward pause if the sequencer on Layer A is playing.

Is there a way to implement this or somehow improve these awkward pauses or sequencer behaviour with an OS update or is it just the way the samples are implemented that itís not possible?
Prophet 6, Prophet X, Moog Sub 37, Oberheim SEM-Pro, Tempest Drum Computer, Roland V Piano, Fender American Stratocaster, Roger Linn Adrenalinn iii, Origin Effects Cali76 and SlideRig compressor, ASUS Zenbook Pro Computer, Soundcraft MTK 22 Mixer, Mark Of The Unicorn Digital Performer 10 Software.

laurentluigi

  • *
  • 82
  • A starship nammed Prophet X !!!
Re: Feature requests
« Reply #42 on: February 11, 2019, 07:08:56 AM »
It will be nice to have a Delay time directly on the LFO's menu. Just to use Mod Slot on something else.

laurentluigi

  • *
  • 82
  • A starship nammed Prophet X !!!
Re: Feature requests
« Reply #43 on: February 19, 2019, 06:23:39 AM »
It will be nice to have the possibility to modulate the Sample's "tone" without using the HPF for both Osc and Inst.

Re: Feature requests
« Reply #44 on: March 24, 2019, 09:41:00 AM »
i made an account just to post this request:

a shortcut key to copy settings from INSTR 1 to INSTR 2.
Which means: copy the same sample + all settings.

This could be very handy to thicken up a sound, and panning them left and right stereo. It's a hassle to locate the key (stretch sample settings). This will save a lot of time!

i think someone else mentioned this also in the gearslutz forum.

+1

Re: Feature requests
« Reply #45 on: March 24, 2019, 09:42:38 AM »
i would love to see those parameters for the FX:

1. HIGHPASS. so important to take out low frequency mud

2. spread from mono to super stereo

3. ability to put FX on one side and dry signal on the other


Agree: digital HP filter FX mode is great. More alternate filter fx like BP/Ntch/comb would be awesome.
« Last Edit: March 24, 2019, 10:35:24 AM by abstrx »

Re: Feature requests
« Reply #46 on: March 24, 2019, 09:44:01 AM »
Hello,
it will be cool to have the Fx values moving when they're modulated.

+1

yes, live values when being modulated from a physical source (like MW or touch strip) would be helpful.
-j

Re: Feature requests
« Reply #47 on: March 24, 2019, 10:02:17 AM »
4 wishes (other than more digital filter Fx, & displaying live mod values when controlled via physical source)...

1) Would love to be able to record mod motion from Touch strips to Env 3 and 4. Like programming looping ADSR via capturing motion from the strips, like a mini automation. I'm thinking press and hold Env 3 button + Touch 1 to enable it, same for Env 4 + Strip 2.  (( or a quick way of motion capturing any mod source to play back from Env 3/4. I'd even sacrifice Env 4 to have 3 become an 8 segment envelope in that mode if feasible).

right now I stack mod sources and add touch strips to control Amt of Env 3 and 4, works, but would be nice to have it be handsfree after the first run and save with the patch :)

2) some quick way to separate VCF control of Sample voices vs VCO's. Yes, this can be done via Stacking 2 patches, but I frequently want to save different cutoff/res/drive values for Osc's vs samples then save and control them together from then on.

3) #2 reminded me I keep wanting a quick way of changing Octave +/- for sample voices only vs Osc's without having to Stack A+B to separate.

4) ability to copy sequences between patches - like Tempest's copy beat or selective copy feat.


:)
« Last Edit: March 24, 2019, 11:04:35 AM by abstrx »

laurentluigi

  • *
  • 82
  • A starship nammed Prophet X !!!
Re: Feature requests
« Reply #48 on: March 25, 2019, 07:32:03 AM »
hello,

for me, still same !
Have the choice, same as the Inst 1 and 2, to let Oscillators goes thru the filter or not!