Thanks for the tip. I will say that I found a bug on oscillator 8 that appears to detune faster than all the other voices. I confirmed this bug with support and they have it on the docket to be fixed. To see what I mean perform these steps:
- Create a Basic Program
- Hold down Edit Layer A+B to edit both layers
- Turn on Unison
- Use 6 voice mode
- Turn Detune to 40
- Turn on Stack
- It is at this point that both should pretty much sound the same as far as detuning goes. They don't however. Continue with next steps
- At this point if you were to turn off Stack and switch between A + B the detuning would sound perfect because the first 6 voices are being used for both Layer A and B independently.
- To truly test the detuning issues force Layer B to use voices 7 - 12 by itself by turning on Midi Multi Mode
- At this point you can now switch between A and B layer with A using voices 1 - 6 and B using 7 - 12. (I use this mode a lot as I am typically using all 4 outs fed to quadrophonic speakers)
- If you listen, Layer B on voices 7 - 12 are not as in tune as Layer A using voices 1 - 6. I have to reduce Layer B's unison mode to 20 to bring it back in line.
- I suspect a weird voice 8 because when I go from 1 voice to 2 programming layer B on voices 7 - 12 it is pretty much out of tune at 40. Not all of the rest of the voices have this problem that I can see.