The Official Sequential/DSI Forum

Feature Requests

Re: Feature Requests
« Reply #280 on: November 27, 2018, 12:56:40 AM »
I thought it was a bug but I've been told that this is intended behavior so I'm kindly asking here for a minor change with big impact:

How to reproduce:
  • Recall a program
  • Turn a poti to adjust a parameter
  • Look at the screen

Current behavior:
There's no feedback about the value of the current parameter until the saved value is reached.

Expected behavior:
As soon as the poti is turned the saved value should be displayed on the screen while the value is not changed until the saved position is reached.

Why:
In most cases when a program is recalled, pretty much all visible parameters have a different internal value. With the current implementation, it is difficult to figure out what value every single parameter has since every poti has to be turned to the saved position while the "show" button is pressed. This takes some time and it needs both hands on the device. However, I suppose that most users would like to have their hands rather on the keyboard most of the time while tweaking the parameters. Especially in live performance situations, the current behavior is an obstacle in the workflow.

Re: Feature Requests
« Reply #281 on: November 27, 2018, 04:54:17 PM »
I think that this is a useful suggestion. In addition, it should be said that this behavior applies to the passthrough knob mode.


I thought it was a bug but I've been told that this is intended behavior so I'm kindly asking here for a minor change with big impact:

How to reproduce:
  • Recall a program
  • Turn a poti to adjust a parameter
  • Look at the screen

Current behavior:
There's no feedback about the value of the current parameter until the saved value is reached.

Expected behavior:
As soon as the poti is turned the saved value should be displayed on the screen while the value is not changed until the saved position is reached.

Why:
In most cases when a program is recalled, pretty much all visible parameters have a different internal value. With the current implementation, it is difficult to figure out what value every single parameter has since every poti has to be turned to the saved position while the "show" button is pressed. This takes some time and it needs both hands on the device. However, I suppose that most users would like to have their hands rather on the keyboard most of the time while tweaking the parameters. Especially in live performance situations, the current behavior is an obstacle in the workflow.

Re: Feature Requests
« Reply #282 on: November 28, 2018, 04:45:38 AM »
A sort of slow down mechanism on knobs to have more accuracy.
In some occasion, picking the right frequency note is very tricky and I keep jumping around my choice.

jg666

  • **
  • 214
Re: Feature Requests
« Reply #283 on: November 28, 2018, 05:58:44 AM »
A sort of slow down mechanism on knobs to have more accuracy.
In some occasion, picking the right frequency note is very tricky and I keep jumping around my choice.

In a lot of these cases you can switch to using the Value knob next to the display as this can be more precise. You can use the Value knob to change the displayed amount.

DSI Prophet Rev2, DSI Pro 2, Moog Sub37, Korg Minilogue, Yamaha MOXF6

eXode

  • **
  • 239
Re: Feature Requests
« Reply #284 on: December 02, 2018, 02:14:31 AM »
Would be nice with an ensemble effect (solina/eminent style) for all the instruments that have digital effects.

Re: Feature Requests
« Reply #285 on: December 03, 2018, 11:23:03 PM »
Polyphonic unison please =)
Moog One <> Prophet Rev2 16Voice <>  Kronos 61 <> Andromeda <> Integra 7 <> Behringer Model D <> Minitaur <> Slim Phatty <> Matrix 1000 <>  Micron <> Privia PX-5S <> Beat Buddy <> Perform VK/VE <> FCB1010

Re: Feature Requests
« Reply #286 on: December 04, 2018, 04:53:56 AM »
Voice limitation in poly mode (not only16/8 voices). To make polyphonic glide usefull. :)

Razmo

  • ***
  • 1453
Re: Feature Requests
« Reply #287 on: December 04, 2018, 05:21:38 AM »
Would be nice with an ensemble effect (solina/eminent style) for all the instruments that have digital effects.

I agree on this one... and I've requested this long ago... the answer is always the same: "there are no space for more FX"...

Re: Feature Requests
« Reply #288 on: December 04, 2018, 12:38:27 PM »
Hi everyone,

This is my first post/comment on the forum ever so I apologise if this question has been asked already. I've had my Rev2 since the end of November and I've not had time to do much exploring as yet. I noticed today that the sustain for the envelopes is not assignable as a destination to modulate. If DSI updated the firmware or something would this be made possible or is this something that cannot be changed?

Cheers

Elliott

The sustain stage has never been available as a modulation destination on any synth, or at least none I can currently think of. It's a level parameter, not a temporal parameter like Delay, Attack, Decay, and Release. You can implicitly modulate it by modulating the filter cutoff or the VCA level directly, depending on what level you'd like to modulate.

My apologies for the extreme late reply on this one haha! This is something I have done on my MatrixBrute which was the first big boy synth I purchased!
DSI Rev2 16 | Arturia MatrixBrute | Arturia DrumBrute | Roland System-1

Re: Feature Requests
« Reply #289 on: December 05, 2018, 09:02:08 PM »
Hi everyone,

This is my first post/comment on the forum ever so I apologise if this question has been asked already. I've had my Rev2 since the end of November and I've not had time to do much exploring as yet. I noticed today that the sustain for the envelopes is not assignable as a destination to modulate. If DSI updated the firmware or something would this be made possible or is this something that cannot be changed?

Cheers

Elliott

The sustain stage has never been available as a modulation destination on any synth, or at least none I can currently think of. It's a level parameter, not a temporal parameter like Delay, Attack, Decay, and Release. You can implicitly modulate it by modulating the filter cutoff or the VCA level directly, depending on what level you'd like to modulate.

My apologies for the extreme late reply on this one haha! This is something I have done on my MatrixBrute which was the first big boy synth I purchased!

I have a few synths where the sustain stage can be a modulation destination like in the MatrixBrute. 

Alesis Andromeda, Fusion, and Micron
Moog Slim Phatty and Minitaur have it as a destination CC 
My Moog One has in its Mod matrix EG1,2,3 sustain as a destination

Would be nice to see sustain as a destination in the Rev2, esp for the filter envelope.

Although, I'd prefer to have polyphonic unison first, as that is much more useful for fattening up voices while retaining polyphony, especially in split mode.
Moog One <> Prophet Rev2 16Voice <>  Kronos 61 <> Andromeda <> Integra 7 <> Behringer Model D <> Minitaur <> Slim Phatty <> Matrix 1000 <>  Micron <> Privia PX-5S <> Beat Buddy <> Perform VK/VE <> FCB1010

Re: Feature Requests
« Reply #290 on: December 06, 2018, 04:08:31 AM »
A sort of slow down mechanism on knobs to have more accuracy.
In some occasion, picking the right frequency note is very tricky and I keep jumping around my choice.

In a lot of these cases you can switch to using the Value knob next to the display as this can be more precise. You can use the Value knob to change the displayed amount.
Didnít know that trick VERY usefull.
Thanks!

Re: Feature Requests
« Reply #291 on: December 08, 2018, 10:30:56 AM »
Voice allocation.
Prophet 6, Prophet X, Moog Sub 37, Oberheim SEM-Pro, Tempest Drum Computer, Roland V Piano,Kurzweil K2600XS, Roland FA-08, Baldwin Upright Piano, Fender Stratocaster, Fender Telecaster, Gibson Chet Atkins SST, Jackson King V, Ibanez Jem, Roger Linn Adrenalinn iii

Re: Feature Requests
« Reply #292 on: Today at 11:19:12 AM »
Another feature Iíd like to see is a feature from the Prophet 10 which was a mode called alternate which alternated between layer a and layer b every other note. It produced some really nice sounds, especially if you held down chords.
Prophet 6, Prophet X, Moog Sub 37, Oberheim SEM-Pro, Tempest Drum Computer, Roland V Piano,Kurzweil K2600XS, Roland FA-08, Baldwin Upright Piano, Fender Stratocaster, Fender Telecaster, Gibson Chet Atkins SST, Jackson King V, Ibanez Jem, Roger Linn Adrenalinn iii