Using the CV Outputs with Dreadbox NYX

[Motion Drive]

Heyhoo

I'm trying to use my new Dreadbox NYx together with the Pro 2. For now I managed to send CV Signals with the LFOs, ENVs etc. to the NYX and its working great. But what I dont get, is how I can play the NYX via CV on the keyboard of the Pro2 or via a sequennce comming from the Pro 2. Of course I tryed as written in the manual and chose "Note Number" as source and a CV output as destination. Amount to 127. Then into the CV In of the NYX. But nothing happens when I play the Keyboard. Any Idea what I'm dooing wrong? Its a shame since everything else works flawless when sening over CV.

[Bryan_D]

Not sure what the pitch range is on the NYX, but try shifting the octaves down on the Pro 2 just to make sure you're not out of the NYX's range. Just a simple test. May not be the problem.

[Motion Drive]

Not sure what the pitch range is on the NYX, but try shifting the octaves down on the Pro 2 just to make sure you're not out of the NYX's range. Just a simple test. May not be the problem.

I just got another Feedback on the DSI Pro 2 Facebook page, that I need to connect the Gate output to the Gat in on the NYX. In the Manual thats not written. But gona check that out.

[DavidDever]

Not sure what the pitch range is on the NYX, but try shifting the octaves down on the Pro 2 just to make sure you're not out of the NYX's range. Just a simple test. May not be the problem.

I just got another Feedback on the DSI Pro 2 Facebook page, that I need to connect the Gate output to the Gat in on the NYX. In the Manual thats not written. But gona check that out.

Right - if you're driving the Nyx exclusively through CV / Gate, you'd need the, errm, Gate!

[Motion Drive]

Not sure what the pitch range is on the NYX, but try shifting the octaves down on the Pro 2 just to make sure you're not out of the NYX's range. Just a simple test. May not be the problem.

I just got another Feedback on the DSI Pro 2 Facebook page, that I need to connect the Gate output to the Gat in on the NYX. In the Manual thats not written. But gona check that out.

Right - if you're driving the Nyx exclusively through CV / Gate, you'd need the, errm, Gate!

Hehe...yeah...stupid me. Its working now, just needed to set the DC a bit offset to tune it properly. But the NYX is behaving strange now. I can play the notes properly and play the sequences right from the Pro 2...all good. But somehow the Modulators (ENV / LFO on the NYX) are not working at all or not as should. Neither does the Glide work anymore. Very strange...any idea what this could be? Is it something common, that when using CV / Gate it can influence other paramters as well?

[DavidDever]

Not sure what the pitch range is on the NYX, but try shifting the octaves down on the Pro 2 just to make sure you're not out of the NYX's range. Just a simple test. May not be the problem.

I just got another Feedback on the DSI Pro 2 Facebook page, that I need to connect the Gate output to the Gat in on the NYX. In the Manual thats not written. But gona check that out.

Right - if you're driving the Nyx exclusively through CV / Gate, you'd need the, errm, Gate!

Hehe...yeah...stupid me. Its working now, just needed to set the DC a bit offset to tune it properly. But the NYX is behaving strange now. I can play the notes properly and play the sequences right from the Pro 2...all good. But somehow the Modulators (ENV / LFO on the NYX) are not working at all or not as should. Neither does the Glide work anymore. Very strange...any idea what this could be? Is it something common, that when using CV / Gate it can influence other paramters as well?

I'd test this on another CV/gate synth, if you can, though you could always use MIDI.

[Motion Drive]

Not sure what the pitch range is on the NYX, but try shifting the octaves down on the Pro 2 just to make sure you're not out of the NYX's range. Just a simple test. May not be the problem.

I just got another Feedback on the DSI Pro 2 Facebook page, that I need to connect the Gate output to the Gat in on the NYX. In the Manual thats not written. But gona check that out.

Right - if you're driving the Nyx exclusively through CV / Gate, you'd need the, errm, Gate!

Hehe...yeah...stupid me. Its working now, just needed to set the DC a bit offset to tune it properly. But the NYX is behaving strange now. I can play the notes properly and play the sequences right from the Pro 2...all good. But somehow the Modulators (ENV / LFO on the NYX) are not working at all or not as should. Neither does the Glide work anymore. Very strange...any idea what this could be? Is it something common, that when using CV / Gate it can influence other paramters as well?

I'd test this on another CV/gate synth, if you can, though you could always use MIDI.

Yeah, I did that as well and just using the CVs for ENV, LFO etc. But I couldnt manage to make the Sequencer playing the NYX with Midi. I can play normaly from the keyboard and the Arp is working too. But when hitting play on the Sequencer nothing happens. Anything special to consider when using the sequencer via Midi?

[extempo]

Yeah, I did that as well and just using the CVs for ENV, LFO etc. But I couldnt manage to make the Sequencer playing the NYX with Midi. I can play normaly from the keyboard and the Arp is working too. But when hitting play on the Sequencer nothing happens. Anything special to consider when using the sequencer via Midi?

In order to have the Pro2's sequencer output MIDI notes, you must use a track with the destination set to one of the "MIDI Out" destinations. Track 1 doesn't output MIDI note data on it's own. If you have a sequence of notes on track 1 that you want to transmit to another piece of gear, copy track 1 to another track and then set the copied track to one of the "MIDI Out" destinations. Also make sure to set the copied track's velocity to a non-zero value.

Additionally, remember that if you're using MIDI Out 2, you must have your Globals configured to where the MIDI Out/Thru port is set to Out and not Thru.

[Razmo]

Do not know if you fixed this yet, but make sure the Pro2 is NOT sending  a gate signal of more than 5volt... higher may very well damage the NYX ... the Dreadbox synths are very vulnarable when it comes to the patch points... connecting an output to an output actually damage the unit permanently.

[SamuelMathe]

Limousine Service Description for Website
Welcome to our premier limousine service, offering unparalleled comfort, reliability, and luxury for your transportation needs. Whether you're arriving at the Seattle-Tacoma International Airport, traveling to North Bend, or exploring Olympia, we’ve got you covered.
- <a href=https://www.seattlestowncar.com/meet-greet-service-in-seattle-airport/>Meet and Greet Service at Seattle Airport</a>
Start your journey stress-free with our meet and greet service at Seattle Airport. Our professional chauffeurs will be waiting for you at baggage claim or your designated pick-up point, ready to assist you with your luggage and provide a seamless transition to your destination. Experience the luxury and convenience of personalized airport transportation tailored to your schedule.
- <a href=https://www.seattlestowncar.com/north-bend-limo-service/>North Bend Limo Service</a>
Travel in style and comfort with our North Bend limo service. Whether it’s for a business trip, a special occasion, or simply a relaxing ride, we ensure you arrive on time and in ultimate luxury. Our fleet of premium vehicles and courteous chauffeurs will elevate your travel experience to new heights.
- <a href=https://www.seattlestowncar.com/olympia-town-car/>Olympia Town Car Service</a>
Discover the perfect blend of elegance and affordability with our Olympia town car service. Whether you’re heading to a corporate event, exploring the city, or need a reliable ride to or from Olympia, our town cars are the ideal solution. Enjoy a smooth, professional ride with a focus on safety and customer satisfaction.
With our commitment to excellence, we guarantee a superior transportation experience that caters to your needs. Book your ride today and enjoy the best in Seattle, North Bend, and Olympia limo services!

[SamuelMathe]

 Welcome to Our Premier Seattle Wedding Limo Service
 
Your wedding day is one of the most significant moments in your life, and arriving in style is paramount. Our  Wedding Limo service Seattle  is designed to ensure your grand entrance is nothing short of spectacular. With our top-tier  Wedding Car service , you can expect luxury, reliability, and a touch of elegance that will make your special day even more memorable.
 
Seattle Economy Town car and Limousine  offers a fleet of immaculately maintained vehicles, each selected for its comfort and sophistication. Whether you prefer a classic stretch limousine, a sleek town car, or a luxurious SUV, our diverse range ensures that you'll find the perfect ride to suit your tastes and needs.
 
Wedding Limo Service Seattle  is more than just transportation; it's an experience. Our professional chauffeurs are trained to provide the highest level of service, ensuring that you and your wedding party arrive on time and in style. From the moment you step into our vehicle, you'll be treated to a seamless journey, allowing you to focus on what truly matters—celebrating your love.
 
Our  Wedding Car Service  is tailored to meet your unique requirements. We offer flexible packages that include everything from pre-wedding transportation to honeymoon getaways. Whether you need a single ride to the ceremony or a full-day service, we are here to accommodate your every need.
 
At  Seattle Economy Town car and Limousine , we understand that every detail counts. Our vehicles are equipped with state-of-the-art amenities, including plush seating, climate control, and advanced sound systems, ensuring a comfortable and enjoyable ride. Additionally, our chauffeurs are knowledgeable about the best routes and scenic spots in Seattle, adding a touch of local charm to your journey.
 
Choosing our  Wedding Limo Service Seattle  means choosing excellence. We pride ourselves on our commitment to customer satisfaction, and our team works tirelessly to ensure that your wedding day transportation is flawless. From the initial booking process to the moment you arrive at your destination, we are dedicated to providing a stress-free and memorable experience.
 
Don't leave your wedding day transportation to chance. Trust  Seattle Economy Town car and Limousine  for a service that combines luxury, reliability, and personalized attention. Contact us today to reserve your  Wedding Car Service  and make your special day unforgettable.