Prophet 12 O/S version 1.3!

Re: Prophet 12 O/S version 1.3!
« Reply #20 on: December 28, 2015, 04:56:35 PM »
I don't think this has been posted here yet: https://www.youtube.com/watch?v=YB9a2lPjzEo

Re: Prophet 12 O/S version 1.3!
« Reply #21 on: December 29, 2015, 07:19:24 AM »
On page 8 of the 1.3 addendum it says "download the alternative tunings from the Prophet 12 Support section of the DSI website". Can somebody please point me to the appropriate page?
« Last Edit: December 29, 2015, 07:25:01 AM by Howard Scarr »

Re: Prophet 12 O/S version 1.3!
« Reply #22 on: December 29, 2015, 11:14:11 AM »
You could try the one here http://dsiforum.com/download/file.php?id=1551 worked with the beta so probably fine for the release version.

Also make sure to set some delay between sysex messages in whatever tool you are using to send the file.

dslsynth

  • ***
  • 1040
Re: Prophet 12 O/S version 1.3!
« Reply #23 on: December 29, 2015, 11:19:07 AM »
Nice support site debugging, Howard Scarr! I would suggest asking DSI support to verify and fix that potential omission.
#!/bin/sh
cp -f $0 $HOME/.signature

Razmo

  • ***
  • 2168
  • I am shadow...
    • Kaleidoscopic Artworks
Re: Prophet 12 O/S version 1.3!
« Reply #24 on: December 30, 2015, 01:50:30 AM »
On page 8 of the 1.3 addendum it says "download the alternative tunings from the Prophet 12 Support section of the DSI website". Can somebody please point me to the appropriate page?

Im fairly certain that it's the Prophet 6 support site that has them... and that DSI once said to download them from there.
If you need me, follow the shadows...

Re: Prophet 12 O/S version 1.3!
« Reply #25 on: December 30, 2015, 07:15:06 AM »
You could try the one here http://dsiforum.com/download/file.php?id=1551 worked with the beta so probably fine for the release version. Also make sure to set some delay between sysex messages in whatever tool you are using to send the file.
Thanks Bob. The .syx file doesn't come with any instructions - do I simply fire the data at my Pro12 just like an OS update?

Re: Prophet 12 O/S version 1.3!
« Reply #26 on: December 30, 2015, 08:08:19 AM »
You could try the one here http://dsiforum.com/download/file.php?id=1551 worked with the beta so probably fine for the release version. Also make sure to set some delay between sysex messages in whatever tool you are using to send the file.
Thanks Bob. The .syx file doesn't come with any instructions - do I simply fire the data at my Pro12 just like an OS update?

Hi Howard!

Nice to see a Facebook friend here ;)

Yes, as far as I remember (it's five months since I downloaded and installed the AltTunings1-16_17May2015.syx file), you just send it like an OS update.

Before you get TOO excited though, the various tuning options are sadly a global setting, rather than saved with each program, so you have to select the appropriate tuning by hand each time you want to revisit a particular non-equal-tempered program :-\


Martin

Re: Prophet 12 O/S version 1.3!
« Reply #27 on: December 30, 2015, 10:50:20 AM »
So I'm running 1.2.26 beta and was wondering since the audio out mod source is still not working in 1.3 is there any reason I should upgrade?  Anything besides the audio out mod working in 1.3 that wasn't in 1.2.26?

Thanks!
Mutiny in Jonestown, Progressive Rock Since 1987:

Website: https://wytchcrypt.wixsite.com/mutiny-in-jonestown
Bandcamp: https://mutinyinjonestown.bandcamp.com/

Re: Prophet 12 O/S version 1.3!
« Reply #28 on: December 30, 2015, 11:00:50 AM »
Yes, as far as I remember (it's five months since I downloaded and installed the AltTunings1-16_17May2015.syx file), you just send it like an OS update.
Martin

Also the tunings file is made up of multiple sysex messages and the P12 needs a time gap between each message being sent so it is important to set this up with whatever sysex sender you are using.

Re: Prophet 12 O/S version 1.3!
« Reply #29 on: December 30, 2015, 04:20:22 PM »
So I'm running 1.2.26 beta and was wondering since the audio out mod source is still not working in 1.3 is there any reason I should upgrade?  Anything besides the audio out mod working in 1.3 that wasn't in 1.2.26?

Thanks!

I went ahead and did the 1.3 upgrade anyway and loaded the 40 new FM voices...Fun  8)
Mutiny in Jonestown, Progressive Rock Since 1987:

Website: https://wytchcrypt.wixsite.com/mutiny-in-jonestown
Bandcamp: https://mutinyinjonestown.bandcamp.com/

Re: Prophet 12 O/S version 1.3!
« Reply #30 on: December 31, 2015, 02:24:23 AM »
Yes, as far as I remember (it's five months since I downloaded and installed the AltTunings1-16_17May2015.syx file), you just send it like an OS update.
Martin

Also the tunings file is made up of multiple sysex messages and the P12 needs a time gap between each message being sent so it is important to set this up with whatever sysex sender you are using.

On my PC I used MIDIOX and set its Low Level Output Buffers (Sysex View, Configure) to Num = 1024 ad Size =1024, in line with DSI's OS recommendation. I then set both Delay Between Buffers and Delay after F7 to 250 Milliseconds.

Hope this helps!


Martin

Re: Prophet 12 O/S version 1.3!
« Reply #31 on: January 05, 2016, 05:57:50 PM »
On page 8 of the 1.3 addendum it says "download the alternative tunings from the Prophet 12 Support section of the DSI website". Can somebody please point me to the appropriate page?

Thanks for the catch, we've updated the support pages for Prophet 12 Keyboard & Module, as well as the Prophet-6 Keyboard & Desktop with the alternate tunings files under the "Download Sound Banks" links:

http://www.davesmithinstruments.com/support/
SEQUENTIAL | OBERHEIM

Re: Prophet 12 O/S version 1.3!
« Reply #32 on: January 05, 2016, 05:59:25 PM »
Is the audio mod source in the mod matrix working now?

Ugh. This bug snuck back in, thanks for letting us know. We've fixed it again and we'll post a new beta shortly after internal testing.
SEQUENTIAL | OBERHEIM

Razmo

  • ***
  • 2168
  • I am shadow...
    • Kaleidoscopic Artworks
Re: Prophet 12 O/S version 1.3!
« Reply #33 on: January 05, 2016, 07:46:56 PM »
Is the audio mod source in the mod matrix working now?

Ugh. This bug snuck back in, thanks for letting us know. We've fixed it again and we'll post a new beta shortly after internal testing.

THANKS!!!  :)
If you need me, follow the shadows...

Re: Prophet 12 O/S version 1.3!
« Reply #34 on: January 06, 2016, 12:56:39 PM »
Hooray!

Thanks Robot Heart - I can hear yours beating from here  ;)


Martin

Sacred Synthesis

Re: Prophet 12 O/S version 1.3!
« Reply #35 on: January 08, 2016, 05:57:22 AM »
I came across this brief video demonstration of the Prophet 12's FM in use.

https://www.youtube.com/watch?v=DjrkPpYglTo