The Official Sequential/Oberheim Forum

SEQUENTIAL/DSI => Tempest => Topic started by: monmart on March 16, 2022, 11:54:11 AM

Title: Sample is inconsistent when pressing pad (See video example...)
Post by: monmart on March 16, 2022, 11:54:11 AM

Hey guys,
I've been stumped on this issue for a couple days now.

When triggering a sample, sometimes the sound changes after every 2-3 trigger of that sound. Mostly noticeable on "Roll". To my knowledge all the modulation sources are turned off completely.

I posted a short video as an example.
https://share.icloud.com/photos/0c6lxKB00iog6cWPplv4hFDPQ

Any insight is helpful, appreciate it, thanks

Title: Re: Sample is inconsistent when pressing pad (See video example...)
Post by: Yorgos Arabatzis on March 17, 2022, 10:50:03 PM

If you haven’t read this thread already i suggest you should do it ASAP..
https://forum.sequential.com/index.php/topic,78.0.html
I wrote a complete guide on how to avoid inconsistency but definitely you should read everything in there..
Cheers!