The Official Sequential/Oberheim Forum
SEQUENTIAL/DSI => Prophet => Sequential Prophet-6 => Topic started by: johnruss on May 31, 2021, 12:13:27 PM
-
I used SysEx Librarian to update my Prophet 6 to 1.6.7 and now the writing pahse of the 1.6.7 update appears stuck. It has been much longer than the 60 seconds mentioned in the guide. I saw the long countdown as the transfer was occurring, and then a shorter countdown, and now the main display shows '11'. I've attached a picture.
What should I do?
-
I used SysEx Librarian to update my Prophet 6 to 1.6.7 and now the writing pahse of the 1.6.7 update appears stuck. It has been much longer than the 60 seconds mentioned in the guide. I saw the long countdown as the transfer was occurring, and then a shorter countdown, and now the main display shows '11'. I've attached a picture.
What should I do?
I had the same thing happen with mine... as you've probably realized by now, just power down and then back up and you should be good to go with 1.6.7. Not sure why it gets stuck at the end.
-
I’ve had every update that I have loaded into my P6 do that except, oddly, the current one which behaved as advertised. Never had any problems after shutting down and then back on.
Cheers,
Keith