The Official Sequential/Oberheim Forum
SEQUENTIAL/DSI => Pro 3 => Topic started by: Cornel on August 23, 2020, 08:26:06 AM
-
Hello,
How do i use a expression pedal in order to adjust the main volume of my Pro 3 SE, with the latest OS. I tried the Roland EV-5 (Works fine on the Pro 2!), the Yamaha FC7 and a Kurzweil expression pedal.
In GLOBAL menu I tried all different settings.
I also tried to set the modulation matrix to have the pedal as the the source, but cannot find “volume’ as destination.
Can anybody help me?
-
In the Mod Matrix, you can assign one slot to be:
Source: Exp Pedal / Foot Pedal
Destination: Env VCA Amount
Amount: 100 (to taste)
Just make sure you turn down the base Env VCA amount on the panel... you'll be adding the VCA amount through the pedal.
You could also use a few mod slots to route Pedal to the three Osc Level 1/2/3 destinations, if you want to control the volume going into the filter, rather than the volume after the filter (at amp)
-
^ This and also in Global Settings the Pedal Function should be set to Expression CC11, something which is not mentioned in the manual. The default is to have it "hard-coded" to the filter.
-
^ This and also in Global Settings the Pedal Function should be set to Expression CC11, something which is not mentioned in the manual. The default is to have it "hard-coded" to the filter.
Ah, thanks so much for this pointer. I had already run into this apparent limitation - great to discover it’s not really there.
-
Thank you very much!!!!
By the way, creativespiral, i bought your soundsets and i love them, very useful for my Marillion Tribute band, for which I need several “vintage” lead sounds. Thanks!!!