The Official Sequential/Oberheim Forum
SEQUENTIAL/DSI => Prophet => Prophet '08 => Topic started by: couleurs on March 26, 2017, 11:41:40 PM
-
Hi,
I recently acquired a new P'08 desktop PE edition and am having some problems with the pots: sometimes the pot will be all the way right to its max position but will have an actual value that's less than the max. At that point I have no way to go further right and have to go back left and then right faster to reach the actual maximum value, almost as if it were an encoder...So I'm a little puzzled. Did that happen to others? Am I missing something?
You can see an example with the attached photo: the resonance pot is all the way to the right, but the actual value is stuck at 96.
Thanks a lot :)
-
Moinmoin,
RTFM, page 10 and 11 of P'08 manual
Martin
-
Hi,
I recently acquired a new P'08 desktop PE edition and am having some problems with the pots: sometimes the pot will be all the way right to its max position but will have an actual value that's less than the max. At that point I have no way to go further right and have to go back left and then right faster to reach the actual maximum value, almost as if it were an encoder...So I'm a little puzzled. Did that happen to others? Am I missing something?
You can see an example with the attached photo: the resonance pot is all the way to the right, but the actual value is stuck at 96.
Thanks a lot :)
Couleurs -
Welcome to the forum. Go to page 11 in Global and set the Pot Mode to "Jump." That should take care of the issue. The Prophet '08 has several options for parameter behavior, but most of us prefer this "jump" mode.
-
Awesome that's exactly it! Thanks a lot :)
-
We've got lots of problem with pot here in Colorado. You can get it anywhere. Eat it, smoke it, vape it... Oh, the pot on the prophet? Er, eh, wrong pot. Nevermind... ;D