The Official Sequential/Oberheim Forum
SEQUENTIAL/DSI => OB-6 => Topic started by: mariosmm on January 09, 2017, 09:55:55 PM
-
Does someone know, how to synchronize the arpeggiator or the Sequencer of the OB-6 with Logic pro x.I tried many different things but i cant find any solution.
i'm trying to connect via usb and the settings on the ob6 are:
MIDI Channel = All
MIDI Clock = Off
Clock Port = USB
Param Xmit = CC
Param Rcv = CC
MIDI Control = ON
MIDI SysEx = USB
MIDI Out = USB
any idea what's wrong?
Thanks
-
You need to switch MIDI Clock to "In" for the OB-6 to receive MIDI clock. You should also determine a specific MIDI channel for the interaction between Logic and the OB-6. So rather choose anything between 1-16, depending on what channel is still free in your setup, instead of ALL.
-
If you're looking for REALLY tight sync, make sure to quantize your trigger notes.
It's also worth pointing out that Logic's own EXS24 sampler can be used to trigger a sample per note, which you can then use to line up against the recorded audio from an external MIDI-synced slave to tighten (or loosen!) up the feel.
-
Thank you very much it works but it has some latency any suggestions for logic midi clock?
-
I use an expert sleepers USAMO for audio synced midi to the OB-6. It's astonishingly tight but uses one of your mono soundcard outs to send a sync signal from their plugin to their audio-midi box.
Here's a demo with everything sequenced from the OB-6 sequencer, recorded one track at a time to Protools.
https://soundcloud.com/twoquietsuns/dsioberheim-ob-6-multitrack-usamo-test