Hello,
is there an output level switch in the globals of the Prophet 6 to reduce the level?

The background to this is that some (but not all) preset sounds override the input of the GFI Specular Tempus, which is connected directly to the stereo output of the Prophet.
I want to use the full control range of the Master Volume control and the GFI has no Input Level control. An output level switch like this would be a help.
Some vintage synths like Polysix or JX-8P have such a switch.

Alternatively, a -6 or -10db pad in the plug could be an option.

Any ideas for this?
Thanks in advance


addendum:
Calbritation was performed, but did not change the Problem

If any of you started experiencing these problems after updating to 1.8, that’s most likely the issue. It wrecked my unit till I downgraded. What it caused was:

1. Pitch problems nonstop, especially after warming up.

2. Hissy noise on notes 5 and 6, again, usually  after warming up.

3. Calibration hanging on 43, also after warming up. It would pass calibration if the unit was cool.

The fix is to email support and get a copy of 1.74 and reinstall it. Why a new OS would break certain units is beyond my knowledge but it clearly is happening. Hopefully they can make a newer update that works universally.

That is, if it even needs many updates at this point… Cheers.

Some thoughts,

• Unless I am missing something the modulation paddle is normally only effective in one direction. When the modulation paddle is pulled downward it proportionally engages modulation. It doesn't seem to have a function when pulled up.
  
  Can we give it a purpose? Perhaps in Page 2, give settings for what get changed and range. Options like filter modulation, filter amount, OSC2 pitch, macros?
  
  I would like the option for non-quantized oscillator pitch settings, combined with allowing for specific tuning chances to be save with the patch. When using cross modulation, the pitch can drift considerably. Essentially allowing for a patch that sounds great, but is hopelessly out of tune to be made usable.
  
  Split and Double modes could benefit from allowing a different base tuning for the constituent patches.
  
  I have one problem when I play... I run into the Transpose Up button causing a jarring change in pitch. A way to optionally lock them, or a mode requiring two click to engage the change would be helpful. Otherwise, I'm going to have to become a better player
  
  I love my OBX8!
  -Rob
  
  

Is there a way to copy the "A" part of a preset onto the "A" part of another preset? I can't figure it out!  Thanks in advance!

Hello, all -
Is this 2.0.4 OS a beta or an official release?  On Sequential's support area for the Prophet 5/10 there is only listed 2.0.1, nothing more recent.  Any clarifications much appreciated, as I am hesitant to update from 2.0.1.
Thank you.

As a new owner, THIS. A bit confused. Mine shipped with 2.0.0, so I went to the Sequential download page and updated to 2.0.1 (no change log found???), then I find out there's also a 2.0.4, but can't even find the download for it...