The Official Sequential/Oberheim Forum
SEQUENTIAL/DSI => Tempest => Topic started by: jconway3 on May 06, 2019, 01:52:06 AM
-
Hi all
Can someone please explain the relationship between the names on the pads in 16 sounds mode with the actual sounds on the individual pads. I have discrepancy between the two. Also how it’s the folder and load sound visible at the outer edge of the display relevant.
I apologise in advance if these are basic quest but I am struggling with interpreting the manual
OS etc are all up to date
Thank you
-
You have to be more specific on that...
-
Hi thank you for your reply. Here goes
So let’s say I’m looking at the 16 sounds screen and in the display and see a sounds name displayed on each of the 16 boxes on the display. Now let’s say box number 1 says TAMB, I would expect to hear a Tambourine sound if I hit pad one but instead I hear something else like say a clap or any other sound. How can I ensure that the 16 boxes on the display are a true reflection of the sounds loaded on each pad.
I hope this makes some sense
-
you can change the name of the pad, in pads screen hold shift then the 3rd knob (Sound Type) above the oled will change the pad name. there is a limited number of usable names. they dont always make sense in the presets.