Recent Posts

Pages: [1] 2 3 ... 10
1
Pro 3 / Re: LFO modulate only 50% of the destination
« Last post by Quatschmacher on Today at 02:02:23 PM »
Just checking if there a way to modulate a destination at 100% with the LFO.

I tried both of your suggestion and I got the same result. + or - 50% range of modulation

It's seem to be the way it's design. I have similar result if I use the LFO Triangle to modulate OSC1 Octave. I don't get -2 to +2 Octave. It's more like the range of 1 octave who's modulate up and down

Ok now it's working with the DC. Thanks for the trick...Full range modulation :)
Great, glad it worked.
2
Pro 3 / Re: LFO modulate only 50% of the destination
« Last post by VicKorfTron on Today at 01:51:16 PM »
Just checking if there a way to modulate a destination at 100% with the LFO.

I tried both of your suggestion and I got the same result. + or - 50% range of modulation

It's seem to be the way it's design. I have similar result if I use the LFO Triangle to modulate OSC1 Octave. I don't get -2 to +2 Octave. It's more like the range of 1 octave who's modulate up and down

Ok now it's working with the DC. Thanks for the trick...Full range modulation :)
3
Pro 3 / Re: LFO modulate only 50% of the destination
« Last post by VicKorfTron on Today at 11:33:14 AM »
Just checking if there a way to modulate a destination at 100% with the LFO.

Ex: I use Square wave LFO to modulate the OSC1 Shape. If OSC1 Shape knob is at Triangle, LFO will only modulate the shape between Triangle and Saw. If I move the Shape knob at Saw, LFO modulate between half Triangle Half Square.

Thanks

Which oscillator?  -  Hmm, I actually get different responses from Osc1 Shape (seems to be full amount? Sine to Square.), or from Osc3 Shape (LFO affects shape at Amount 0 [wth?], and I have to turn it below zero to get it to not change the shape... (?))

And I get some effect on Osc1 Shape when the LFO is at Amount 0 if the Shape knob is at 50% (sawtooth).

Weird.  I'm confused.

Edit:  Oh, I was gonna say...   Can you double the amount with an extra slot in the Mod Matrix?
- I can "undo" the LFOs effect with an extra entry set to -127.

Like I said, It's OSC1. I didn't try the other one. I'm just wondering if it's normal? If yes, how can I get 100% modulation.

When I turn the LFO amount, it doesn't change anything. I have no change, only the Modulation amount will affect up to 50% only
Try this:

Add a mod lane with DC as source and direct that to the wave shape. Set its amount to zero. Then modulate that mod slot with the same LFO that you are directing at the wave shape. That should hopefully increase the range but only when the square wave LFO is at its peak; when at its trough, it should add nothing.

I'll give it a try tonight when I get back home. The answer I'm looking for is, "Is the PRO-3 design to modulate an average of 50% with LFO or my unit have something?"
Also check if you get the same result when modulating with a triangle LFO. I believe that square is unipolar whereas others are bipolar so that might be the issue.

I tried both of your suggestion and I got the same result. + or - 50% range of modulation

It's seem to be the way it's design. I have similar result if I use the LFO Triangle to modulate OSC1 Octave. I don't get -2 to +2 Octave. It's more like the range of 1 octave who's modulate up and down
4
Pro 3 / Re: LFO modulate only 50% of the destination
« Last post by Quatschmacher on Today at 10:21:08 AM »
Just checking if there a way to modulate a destination at 100% with the LFO.

Ex: I use Square wave LFO to modulate the OSC1 Shape. If OSC1 Shape knob is at Triangle, LFO will only modulate the shape between Triangle and Saw. If I move the Shape knob at Saw, LFO modulate between half Triangle Half Square.

Thanks

Which oscillator?  -  Hmm, I actually get different responses from Osc1 Shape (seems to be full amount? Sine to Square.), or from Osc3 Shape (LFO affects shape at Amount 0 [wth?], and I have to turn it below zero to get it to not change the shape... (?))

And I get some effect on Osc1 Shape when the LFO is at Amount 0 if the Shape knob is at 50% (sawtooth).

Weird.  I'm confused.

Edit:  Oh, I was gonna say...   Can you double the amount with an extra slot in the Mod Matrix?
- I can "undo" the LFOs effect with an extra entry set to -127.

Like I said, It's OSC1. I didn't try the other one. I'm just wondering if it's normal? If yes, how can I get 100% modulation.

When I turn the LFO amount, it doesn't change anything. I have no change, only the Modulation amount will affect up to 50% only
Try this:

Add a mod lane with DC as source and direct that to the wave shape. Set its amount to zero. Then modulate that mod slot with the same LFO that you are directing at the wave shape. That should hopefully increase the range but only when the square wave LFO is at its peak; when at its trough, it should add nothing.

I'll give it a try tonight when I get back home. The answer I'm looking for is, "Is the PRO-3 design to modulate an average of 50% with LFO or my unit have something?"
Also check if you get the same result when modulating with a triangle LFO. I believe that square is unipolar whereas others are bipolar so that might be the issue.
5
Tempest / Re: Buying Used Tempest Advice
« Last post by KoSv on Today at 10:16:22 AM »
check vor voice sound consistancy. pad response, individual outs, knobs/poti's, oled.


Hi

I'm considering buying a used Tempest and I'd appreciate any advice on what to check when buying one.

What are the hardware/software problems I should look for?

Thanks
6
Pro 3 / Re: LFO modulate only 50% of the destination
« Last post by VicKorfTron on Today at 09:54:03 AM »
Just checking if there a way to modulate a destination at 100% with the LFO.

Ex: I use Square wave LFO to modulate the OSC1 Shape. If OSC1 Shape knob is at Triangle, LFO will only modulate the shape between Triangle and Saw. If I move the Shape knob at Saw, LFO modulate between half Triangle Half Square.

Thanks

Which oscillator?  -  Hmm, I actually get different responses from Osc1 Shape (seems to be full amount? Sine to Square.), or from Osc3 Shape (LFO affects shape at Amount 0 [wth?], and I have to turn it below zero to get it to not change the shape... (?))

And I get some effect on Osc1 Shape when the LFO is at Amount 0 if the Shape knob is at 50% (sawtooth).

Weird.  I'm confused.

Edit:  Oh, I was gonna say...   Can you double the amount with an extra slot in the Mod Matrix?
- I can "undo" the LFOs effect with an extra entry set to -127.

Like I said, It's OSC1. I didn't try the other one. I'm just wondering if it's normal? If yes, how can I get 100% modulation.

When I turn the LFO amount, it doesn't change anything. I have no change, only the Modulation amount will affect up to 50% only
Try this:

Add a mod lane with DC as source and direct that to the wave shape. Set its amount to zero. Then modulate that mod slot with the same LFO that you are directing at the wave shape. That should hopefully increase the range but only when the square wave LFO is at its peak; when at its trough, it should add nothing.

I'll give it a try tonight when I get back home. The answer I'm looking for is, "Is the PRO-3 design to modulate an average of 50% with LFO or my unit have something?"
7
Pro 3 / Re: LFO modulate only 50% of the destination
« Last post by Quatschmacher on Today at 07:41:16 AM »
Just checking if there a way to modulate a destination at 100% with the LFO.

Ex: I use Square wave LFO to modulate the OSC1 Shape. If OSC1 Shape knob is at Triangle, LFO will only modulate the shape between Triangle and Saw. If I move the Shape knob at Saw, LFO modulate between half Triangle Half Square.

Thanks

Which oscillator?  -  Hmm, I actually get different responses from Osc1 Shape (seems to be full amount? Sine to Square.), or from Osc3 Shape (LFO affects shape at Amount 0 [wth?], and I have to turn it below zero to get it to not change the shape... (?))

And I get some effect on Osc1 Shape when the LFO is at Amount 0 if the Shape knob is at 50% (sawtooth).

Weird.  I'm confused.

Edit:  Oh, I was gonna say...   Can you double the amount with an extra slot in the Mod Matrix?
- I can "undo" the LFOs effect with an extra entry set to -127.

Like I said, It's OSC1. I didn't try the other one. I'm just wondering if it's normal? If yes, how can I get 100% modulation.

When I turn the LFO amount, it doesn't change anything. I have no change, only the Modulation amount will affect up to 50% only
Try this:

Add a mod lane with DC as source and direct that to the wave shape. Set its amount to zero. Then modulate that mod slot with the same LFO that you are directing at the wave shape. That should hopefully increase the range but only when the square wave LFO is at its peak; when at its trough, it should add nothing.
8
Pro 3 / Re: LFO modulate only 50% of the destination
« Last post by VicKorfTron on Today at 06:03:48 AM »
Just checking if there a way to modulate a destination at 100% with the LFO.

Ex: I use Square wave LFO to modulate the OSC1 Shape. If OSC1 Shape knob is at Triangle, LFO will only modulate the shape between Triangle and Saw. If I move the Shape knob at Saw, LFO modulate between half Triangle Half Square.

Thanks

Which oscillator?  -  Hmm, I actually get different responses from Osc1 Shape (seems to be full amount? Sine to Square.), or from Osc3 Shape (LFO affects shape at Amount 0 [wth?], and I have to turn it below zero to get it to not change the shape... (?))

And I get some effect on Osc1 Shape when the LFO is at Amount 0 if the Shape knob is at 50% (sawtooth).

Weird.  I'm confused.

Edit:  Oh, I was gonna say...   Can you double the amount with an extra slot in the Mod Matrix?
- I can "undo" the LFOs effect with an extra entry set to -127.

Like I said, It's OSC1. I didn't try the other one. I'm just wondering if it's normal? If yes, how can I get 100% modulation.

When I turn the LFO amount, it doesn't change anything. I have no change, only the Modulation amount will affect up to 50% only
9
Pro 3 / Re: LFO modulate only 50% of the destination
« Last post by Elric on Today at 04:39:38 AM »
Just checking if there a way to modulate a destination at 100% with the LFO.

Ex: I use Square wave LFO to modulate the OSC1 Shape. If OSC1 Shape knob is at Triangle, LFO will only modulate the shape between Triangle and Saw. If I move the Shape knob at Saw, LFO modulate between half Triangle Half Square.

Thanks

Which oscillator?  -  Hmm, I actually get different responses from Osc1 Shape (seems to be full amount? Sine to Square.), or from Osc3 Shape (LFO affects shape at Amount 0 [wth?], and I have to turn it below zero to get it to not change the shape... (?))

And I get some effect on Osc1 Shape when the LFO is at Amount 0 if the Shape knob is at 50% (sawtooth).

Weird.  I'm confused.

Edit:  Oh, I was gonna say...   Can you double the amount with an extra slot in the Mod Matrix?
- I can "undo" the LFOs effect with an extra entry set to -127.

10
Pro 3 / LFO modulate only 50% of the destination
« Last post by VicKorfTron on Today at 03:13:20 AM »
Just checking if there a way to modulate a destination at 100% with the LFO.

Ex: I use Square wave LFO to modulate the OSC1 Shape. If OSC1 Shape knob is at Triangle, LFO will only modulate the shape between Triangle and Saw. If I move the Shape knob at Saw, LFO modulate between half Triangle Half Square.

Thanks
Pages: [1] 2 3 ... 10