Did you manage to update the Mopho x4 to the new firmware?

2021 Apr; 15 2 108- 114 <a href=http://cialis.lat/discover-the-best-prices-for-cialis>best site to buy cialis online</a> Yost GC, Young PC, Buchi KF

Contact support and they’ll help you out. Could be something as simple as the ribbon connector cable inside being a bit loose.

Hello everyone, I'm a proud owner of the Pro 3 and new to the forum here.

I picked up this machine second-hand at a Guitar Center around five months ago. It was a used item. Since I've had it, there has been a crashing issue with my model. It has not affected me as severely as it potentially could (e.g. I'm able to program patches and save them in addition to 99% of the parameters working fine) but I am not sure that I can ever use my Pro 3 for a live performance without worry. The text below details the problem I'm experiencing:

The glide and hold hardware buttons do not send any information to the synthesizer on patches and presets alike. This is the case when initially loading any patch or preset. If I tap either button, neither of them light up nor do they indicate changes in the panel. In addition to that, the LFO frequency knob and the modulation amount knob do not bring me to their panel pages when interacting with them. This has been mildly frustrating and I simply stopped caring for those parameters for a while after discovering the malfunction. I've tried searching online for any similar experiences and nothing has shown up. Yesterday, I got fed up with this issue and decided to troubleshoot it for a few hours. I had no luck until I unintentionally changed the LFO 1 default amount by one digit (up or down, doesn't matter) and suddenly all of the aforementioned parameters work as they are expected to. So, after interacting with the LFO amount on any given patch, I can then successfully interact with the glide and hold buttons on the hardware and in the panel in addition to being brought to panel pages by interacting with the LFO frequency and modulation amount knobs. However, that is the half of my issue. This is only a temporary fix to the problem and another malfunction occurs; at any given moment, the Pro 3 will randomly activate both glide and hold on the synthesizer (which shows on the hardware) and reset the patch to its default program settings. I genuinely have no idea why this occurs. Today, I found the 1.2.0.7 OS update and installed it on my model with hope that it would fix this problem but it is still behaving as it was before.

Anyone have this issue or know why this might be happening? Similarly, I have considered static discharge and unplugged a cord that connects in the outlet next to my Pro 3's power supply connection but that did not help.

Hi!
I am having issues with my new P6 module not sending any MIDI info to logic when recording.(Logic Pro X) I can hear the synth and when i record an audio track, it records the audio, but no MIDI is written on the external synth track. I also am using my OB-6 as the MIDI controller.

I think that by default the midi out on the P6 is just that ... a midi out. What you want to use is the midi thru port. This will echo the midi coming in from the OB-6 out to your computer. Just tried it using my PX as the midi controller and it works fine.

I don't know Logic Pro, but I would assume that a midi track would have the ability to set midi channel and midi input device. If not then it's time to move to another DAW. Anyway, check that all is properly set in the midi track and it should work. Also check the audio/midi setup in the iMac utility folder to make sure your midi interface device is there and set up properly.

I use an iMac in my studio and do LOTS of midi. Two apps that I find extremely useful are Midi Patchbay and Midi Monitor, both of which are freely downloadable. I couldn't function without them. I have 9 midi devices in my studio and it's a very simple matter to connect one to another via Patchbay. Monitor is great for those times when something isn't working the way you want it to.

Hope you get it working.