The Official Sequential/Oberheim Forum
SEQUENTIAL/DSI => Pro 2 => Topic started by: jobinho on November 22, 2019, 02:34:32 PM
-
The Arp on my Pro 2 simply cycles up through different notes, none of the control work as normal.
Has anyone else experienced this - hope my Pro 2 isn't dying :'(
-
Hi
i was just looking to fix the same problem ... look like the arp is sending a midi control out of nowhere that when it gets back from the DAW, only affect Osc 1 pitch... i cant get rid of it!
The 3 others look fine when i turn off the first one.
does it seems to be the same problem?
in the picture is what is recorded along the ARP notes
-
My problem was resolved - it was something to do with my routing in Live.
Maybe test your Pro 2 without the MIDI or DAW attached and see if the problem is being generated externally.
-
the problem is only there when its connected to logic with the local off and the track is selected to play the synth.
when i select another track and start the arpegio all is good.
and like you can see in the picture it does no give the parameter so i can filter it out..
what im i missing here... :(
-
the problem is only there when its connected to logic with the local off and the track is selected to play the synth.
when i select another track and start the arpegio all is good.
and like you can see in the picture it does no give the parameter so i can filter it out..
what im i missing here... :(
Did you find a resolution to this issue? Mine was short-lived and am back to square one. My guess is this is a bug in the latest and final firmware? When the Arp is activated in any DAW, OSC 1 pitch starts to cycle up in notes. When not connected to a DAW it works as normal.
Is anyone else experiencing this?
-
On a sidenote, please beware of possible Midi Feedback Loops when connecting the pro2 to a daw via midi/usb. I get al kind aof weird behavior when i forget to disable Midi rec in Live and turn knobs, select Arp etc. Check your midi routing.