Program Volume via MIDI

[greg smith]

Hi All,

I bought my Rev 2 specifically for its multi mode option, but am having a few problems with it, I wonder if anyone can help. I'd like to be able to control each program's MIDI volume discretly, yet when I send CC 7 to the global MIDI channal both programs are affected. Similarly, if I send CC7 to the next MIDI channel, both programs are affected. This seems strange as I can control all the other parameters on a per-channel basis, yet it seems the synth is seeing CC7 as master volume regardless of which channel I send it on.
Any thoughts or help would be much appreciated.

g

[vincent neutron]

There are to nrpn that relate to the two different layers levels, they are in the midi implementation charts.

[greg smith]

Thank you Vincent - I have looked for them in the manual, and have looked again since reading your reply, and I can't find them. There's one reference under Received Controller Messages for 'Volume: Combinded with Master Volume and Program Volume', and nothing in the NPRN list. Would you mind telling me which page/number I'm looking for please..?

g

[maxter]

These are the NRPN's:
Layer A #29 (0+29)
Layer B #2077 (16+29)

[greg smith]

Thanks Maxter,

I'd seen NPRN #29 was listed as Voice Volume, I'd assumed that was something other that program volume. But can't see where the layer B number is listed - ideally I'd like to look up this information myself and not have to post here - is there another more comprehensive list other than the one in the back of the manual?

Anyway thank you very much for your help.

g

[shiihs]

Thanks Maxter,

I'd seen NPRN #29 was listed as Voice Volume, I'd assumed that was something other that program volume. But can't see where the layer B number is listed - ideally I'd like to look up this information myself and not have to post here - is there another more comprehensive list other than the one in the back of the manual?

Layer B nrpn number is always Layer A nprn number + 2048

[maxter]

Thanks Maxter,

I'd seen NPRN #29 was listed as Voice Volume, I'd assumed that was something other that program volume. But can't see where the layer B number is listed - ideally I'd like to look up this information myself and not have to post here - is there another more comprehensive list other than the one in the back of the manual?

Anyway thank you very much for your help.

g

A more comprehensive list... Unfortunately no, not that I know of... There are some parameters missing from the list in the manual, but as mentioned by Greg Smith every Layer B parameter is the same as Layer A + 2048, or with a byte of 16 instead of 0 for the LSB (or is it MSB? I keep mixing them up). A pretty neat solution for those programming editors and such for the Rev2.