The Official Sequential/DSI Forum

BETA OS v1.1.5.9 Bug Report Thread

Djinn

Re: BETA OS v1.1.5.9 Bug Report Thread
« Reply #180 on: September 26, 2019, 07:44:36 AM »
When will we see another update I'd love to see some new features! Let alone all these annoying bugs that need fixing... I hope the rev2 is not another example of dsi seeing its users just hanging in the wind with another unfinished product.

Re: BETA OS v1.1.5.9 Bug Report Thread
« Reply #181 on: September 30, 2019, 01:27:18 PM »
Hi.
I have a Question.
Is the Patch-Volume increase or decrease linear?

For example: I have two patches.
The volume of patch 1 is 80. The volume of patch 2 is 120.

When i decrease both with the value of 20 (patch 1 is 60 and patch 2 is 100 now), have i still the same volume ratio?

Thanks alot!

Larioso

Re: BETA OS v1.1.5.9 Bug Report Thread
« Reply #182 on: October 10, 2019, 10:07:57 PM »
Is it a bug that the slew of the gated sequencer doesn't affect a sequence when it is routed through the mod matrix? 

Slew only works for me when you route the sequence to a parameter directly from the sequencer section, not the mod matrix.

Yes, this would be a problem if true, one of the things I thought of doing - using mod matrix as well from gated sequencer.

Can anybody confirm this?

My module is still on the way, so will see which OS is on it when arriving next week.

What is the interval new OS releases?
A bit disturbing that 2 year old synth still have major bugs.
It could be I just return it.

Should have looked up forum before purchase.
Most things I've seen reported is not things I would use, like external clocks and such.

noir

Re: BETA OS v1.1.5.9 Bug Report Thread
« Reply #183 on: October 12, 2019, 10:28:55 AM »
I just tested what it does on my rev2.

When the stored value = 0 and the pot is at at 63. I press misc, and turn up. After turning about 15 degrees up it shows 0.
Also the other way around. When I turn about 15 degrees down, the actual value is shown.

This makes me think that you don't have to reach the stored value but it appears that way. It just takes quite a turn to get the stored value on the display. Not just by touching it.

This is not the case for me. I have to turn the poti until it has reached the saved position. Tested it on many parameters.

Re: BETA OS v1.1.5.9 Bug Report Thread
« Reply #184 on: October 15, 2019, 02:48:00 PM »

Yes, this would be a problem if true, one of the things I thought of doing - using mod matrix as well from gated sequencer.


Just to be clear, you can definitely route the gated sequencer through the mod matrix just fine.  The issue is that for example, if you modify sequence A slew with sequence B and then you route sequence A to osc pitch through the mod matrix, the pitch is not gliding gradually like it should from slew, it is jumping in quantized amounts.