Hi all,
anyone out there using a Behringer BCR2000 to control the P12 with NRPN codes? The rotary encoders are working great but I'm having problems getting the buttons to function properly.
For example, with OSC1 sync...no matter what value I send to NRPN 11, all it will do is turn the Osc1 Sync On, nothing I send will turn it off. I've tried all variations of the 'toggle on' message, sending param1's of 0, 1, or 127 and param2's of 0, 1, or 127 with no success. Below is what Midi-Ox shows I'm sending...line 3 shows the "On" value of 127 (or 7F) and line 6 shows the "Off" value of 0. Problem is, the "Off" value doesn't turn the OSC1 sync off.
TIMESTAMP IN PORT STATUS DATA1 DATA2 CHAN NOTE EVENT
0000CAAB 1 -- B0 63 00 1 --- CC: NRPN MSB
0000CAB3 1 -- B0 62 0B 1 --- CC: NRPN LSB
0000CAB3 1 -- B0 06 7F 1 --- CC: Data Entry MSB
0000D837 1 -- B0 63 00 1 --- CC: NRPN MSB
0000D844 1 -- B0 62 0B 1 --- CC: NRPN LSB
0000D844 1 -- B0 06 00 1 --- CC: Data Entry MSB
So, anyone else having this problem? If not, can you tell me what values you're sending from the BCR2000 buttons?
Thanks!
Dennis